drivers side firewall high up, small plastic reservoir
How to change a clutch and master cylinder on a 93 jeep wrangler
It is not adjustable.
It's a hydraulic clutch ( the clutch fluid reservoir is near the brake master cylinder )
You may have to have your clutch adjusted,
It's a hydraulic clutch and can't be adjusted.
A 1993 does not have a clutch fork if it is a pick-up truck. It has an hydraulic slave cylinder.
where and how to adjust clutch pedal 1993 s10 It is hydraulic operated, there is no adjustment.
You can't, There is no adjustment. You either have a bad clutch slave cylinder, are worn out clutch parts.
Your clutch is not working any more, check,
It is on the input shaft of the transmission (inside the bellhousing). to remove it you need to remove the transmission enough to slide the input shaft, remove the hydraulic lines that control it and slide it off the shaft.
The 1993 Saturn used a self adjusting hydraulic clutch system on the manual transmission vehicles. As such, the clutch never needs adjustment. If you're having trouble with the clutch, it is most likely because of a worn or damaged clutch assembly.
all clutches are internal. that is to say they are inside the bell housing