answersLogoWhite

0

  • Auto Parts and Repairs
  • Headlights Tail and Brake Lights
  • Jeep Grand Cherokee Limited

1997 lumina you have no brake lights but your back dash light works?

User Avatar

Wiki User

βˆ™ 2015-07-15 21:30:23

Best Answer
Copy

It's the turn signal switch at the steering wheel, that is the problem. Very exspensive to get replaced,and to hard for an amuture to do.

If you have checked all fuses and bulbs sounds like ur turn signal switch in ur steering wheel. I had the same problem and was switch.

2015-07-15 21:30:23
This answer is:
πŸ€“
🀯
πŸ€”
User Avatar

Your Answer

Loading...

Related Questions

Where does the high center brake light wiring and the brake light wiring split on a 1997 Chevy lumina. the high center brake light works but the brake lights do not?

Check bulbs?


1997 Chevrolet Lumina rear window brake light works but the brake lights in back don't work?

you need to change the multifunctional switchthis happened to mine to


1998 Chev Lumina your rear lower brake lights do not work The upper rear brake light works If you push the emergency flashers the lower brake lights start to work againWhat can be the problem you were?

It's the turn signal switch which is the culprit.


Your brake lights and head lights do not work your blinkers and running lights do?

My rear window brake light works, but not my tail light brakes on my 1997 Monte Carlo. What is the problem?


How do you fix the brake lights on a 1996 Chevy Lumina?

It depends on the exact problem. If it's that both brake lights in the back do not work and the middle one works, it could be your turn signal switch.


Center brake light works side brake lights do not work 2000?

its gotta be a ford a problem with the center brake light circuit causes the lights to go out i believe it is a diode


What fuse is the brake lights on 2000 ford expedition?

The left brake light works the right brake light doesn't and the bulbs is good


Can 99 Chevy lumina third brake light works but 2 bottom brake lights only work if you wiggle turn signal lever?

it is the turn signal stalk. here is a good writup for repair. http://tss.likeabigdog.com/


What could you check if your drivers side brake light works when headlights are off but not when on?

The ground for the brake lamp. When the tail lights are off, the tail light circuit can act as a ground for the brake light. When the tail lights are on, it can't.


1997 Cadillac eldorado has no brake lights the brake light in the rear window works and all signal lights work just no rear brake lights?

the turn signal switch is probably bad


1996 Chevrolet truck park lights work but brake lights don't Brake light on top of cab works so why don't the brake lights on the back of the truck work?

it could be the brake light switch that usually contacts the break pedal when you depress the brake pedal. check that out first.


What do you need to do if both your brake lights are out in the rear of your 1998 Ford Coutour but your rear window light works the fuse and both lights are good and the signal and driving light work?

your brake light switch is probably out


Why left side brake light doesn't work when I step on the brake but works when the head light is on?

tail light bulbs has two filaments inside. One for regular lights and a second for brake lights. One filament is burnt out. Change the bulb.


Why don't Brake lights work on 96 Camry cruise works lights work and replaced brake light switch?

Check the fuse. Then check the wiring.


1998 lumina the window brake light works but not the main brake lights what could be wrong?

Try the turn signal switch in the steering column. I know it sound stupid but that is the problem and they are not cheap. At a service shop besides a dealer you are probably talking around $200+. I had the same problem, sometimes the rear brake lights would work and sometimes not but window light always worked. Good Luck


Toyota Tacoma troubleshooting 1996 Toyota Tacoma brake lights not working cab brake light works Tail light bulbs ok?

Yes


What would make the brake lights and reverse lights on your 93 ford ranger not come on Bulbs are good and top brake light works?

u have a short in ur wireing.


Why are your brake lights out on your 2003 Hyundai?

if you 3rd brake light still works it is most likely a fuse. If none of your lights work usually it is the brake light switch located on the top of the brake pedal. Although there could be some odd wiring issue. Chances are it is the switch.


Tail lights works but not brake light?

Those are completely separate circuits. First check the brake light bulbs to be sure they are not burned out. If they check okay, check the brake light fuse. If the fuse checks okay, check the brake light switch.


What do you do if the brake lights work but not the tail lights?

i got a 2006toyota highlander my tail lights dont work but,every other light works please help me


What could cause brake lights on 2000 Grand Cherokee to not work other then light fuse and brake light switch middle brake light works just rear do not?

You need to check the wiring for power to the bulbs.


Why would the brake lights tail lights and turn signals not work on your 1985 Volvo 240 if emergency flashers are operational and fuses and bulbs are good?

I am having the same trouble. My brake lights work with the light switch for nighttime driving, but only far right brake light works when i pres brake pedal. Reverse lights dont work at all. Turn signals and hazard light work.


What wrong with brake lights don't work switch and bulbs were changed the top bar light works?

What year is the Ford Explorer ? There could be a separate fuse for the lower brake lights


Brake lights on 99 S-10 stay on all of the time but the third light on the cab works brake light switch replaced and they are still on what else could be wrong?

why my jeep brake light on all time


Does the 1967 Pontiac GTO have a separate fuse for the brake lights?

If everything else works but the brake lights, check the brake light switch. It's mounted up under the dash and when you push the brake pedal a spring loaded plastic rod extends, making the connection inside the switch to light the brake lights. This is a pretty common wear item.....and fairly inexpensive.