Hub and bearing assembly and tighten the bolts to 61-78 ft. lbs. (83-107 Nm)
290 nm front wheel bearing 1.7 puma
The front wheel bearing torque setting on a Renault Clio ranges between 112 to 174 ft lbs. One needs to use a 30 mm socket on a 1 inch air gun to loosen the nut.
Front wheel bearings are pressed in using a hydraulic press, no torque setting. However, the wheel hub retaining/axle nut that you need to remove and replace in order to change out the bearing needs to be torqued down to 233 ft-lb.
front bearing torque 151 ft lb rear bearing torque 63 ft lb plus 36 degrees
Front hub/wheel bearing torque is 190-210Nm.
Using new bolts, torque the front hub/bearing assembly to 96 ft-lbs.....
It is 175 ft lbs for the front wheel bearing of a grand cherokee
2003 SATURN L 300 front axle torque spec
what is the torque on front wheel bearings for 1998 honda accord
A torque wrench is not required to remove the bearing. It is required to apply the correct loading to a nut or bolt when assembling. Because the fixture may have been in place for some time a greater force may be needed for removal, because of corrosion or dirt, than the original torque setting applied.
Make and model would help.
Rear end of the engine - front end of the transmission