The door molding just pulls off, the fender and quarter panel pieces have small screws or push pins that need to be removed first. Then they all just pull off. The new ones come with replacement inserts so don't worry about damaging the old ones.
open the door remove screw holding molding to base of side view mirror. seperate molding from mirror. remove bolt holding top or side view mirror to A-pillar. remove bolts holding bottom side of mirror to A-pillar. disconnect wiring connector.
THere is two screws on the bottom of panel. then there is a plate behind door latch remove and there is a screw 5/16 or 8mm will do it then unplug window module then lift up. Yeah I got it. Kenny Wideman Jersey_bad_boy@yahoo.com
If you open the hood, there are 5 small nuts that hold that hood molding in place. simply remove those and you can remove/replace the hood molding.
Go to this website. It will show how to remove the door panel and the side mirror.
Passenger side under the glove box by the floor. Remove the panel you will see it.
If you open the hood, there are 5 small nuts that hold that hood molding in place. simply remove those and you can remove/replace the hood molding.
it's on the passenger right side kick panel,remove the cover and you will see it.
first you must remove the screw on the bottom right of the radios molding. then remove that molding by prying it apart. then there are two screws one above and one below the hand grip located on the front part of the dash remove those screws. next under the steering wheel and above it there is a molding that meets in the middle insert a flat head horizontally and in an upward movement separate the two moldings. next tilt sterring down all the way. and forcefully remove the entire molding that is surrounding the cluster and extends out to that hand grip. next throw it in the back and you now have four screws to remove to complete the extraction of the cluster.
first you must remove the screw on the bottom right of the radios molding. then remove that molding by prying it apart. then there are two screws one above and one below the hand grip located on the front part of the dash remove those screws. next under the steering wheel and above it there is a molding that meets in the middle insert a flat head horizontally and in an upward movement separate the two moldings. next tilt sterring down all the way. and forcefully remove the entire molding that is surrounding the cluster and extends out to that hand grip. next throw it in the back and you now have four screws to remove to complete the extraction of the cluster.
pop the cover off the light at the bottom, there is a screw there. the small cover at the top has a screw behind it. pop the ring around the handle loose and pull up on the door. you have to reach inside and disconnect the harnesses for the window and lock and the bulb at the bottom
The fuse box is located on the passenger side bottom right triangular panel at the passengers feet. The cover pulls off very easily. :) Thanks! It is located behind the passenger side kick panel. Once you remove the kick panel, there is a slot at the bottom of the fuse box cover. Place a flat head screw driver there to pop the cover off.
Using a screwdriver, remove the screws and clips from the panel. Pull the panel away slowly, remove wiring connections and the panel will come free.Ê