Want this question answered?
Follow the link below, labeled "How to replace a Lexus IS300 tail light"
Open the trunk. Loosen the black thumb latch wing nuts that hold the tail light assembly in place. pull the tail light assembly out. You should be able to acces the tail light bulbs to replace them.
replace rear tail light bulb
you don't replace the tail light you just replace the bulb in it
this is for the 01 model. it might also be the same for the 03, http://www.porkfist.com/repairs/auto/lexus-is300-taillight.html
On a 2012 toyota Highlander, How do you replace tail light Assembly
incorrect resistance of light bulbs installed. causes electrical feed back. replace all bulbs with factory replacement Also check that the tail light ground is ok. If the tail light bulbs aren;t grounded, it causes a backfeed of power to the dash lights and causes them to turn on.
Remove carpet inside trunk that covers tail ligh assembly, then unbolt tail light assembly, remove the assembly and bulb fixture of the bulb you want to replace, replace bulb and re-install in reverse order.
Remove tail light housing. Remove lamp. Replace lamp. Replace tail light housing.
you can take the tail light out by unscrewing the wing nuts in the trunk, when all wing nuts are off pull the tail light out then take the light bulbs out to replace the tail light.
You can not, you will have to replace the entire tail light.
You don't, you change the bulb from inside the luggage area. To replace a broken red plastic tail light cover on a 2003 Ford Focus SE, open the trunk of the car. Look in the area inside the trunk opposite of where the tail light is located on the outside of the car. There will be 3 thumbscrews and one Phillips head screw used to attached the tail light cover. Remove all the screws. Pull the broken light cover away from the body of the car. Replace with new tail light cover and replace and tighten screws.