0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How do you replace a rear wheel bearing on a dodge ram?
In order to replace the rear wheel bearing you will need to find the axle shaft bearings and remove them. They are located at the center of the housing where the ring and pinion gears and at the axle end near the wheel mounting position.
What is the source of a grinding noise coming from the rear of a 2001 Ford Mustang GT?
axle bearing or brakes or pinion bearing
How do you replace the rear wheel bearings on a 1987 Chevrolet pickup with gov-loc differential?
Which differential bearings? Pinion bearing? Carrier bearings? End axle bearings?
How do you fix a 1995 Buick Lesabre axle?
there is no fixing you have to replace the rack and pinion
What is the preload on the pinion bearing and the backlash on the crownwheel and pinion inside the rear differential of an English 1970 ford escort?
If this helps the sailsbury axle of a cortina details are crownwheel and pinion backlash 0.004-0.008" pinion bearing preload 0.001-0.003" collapsible spacer length 0.453-0.461".
How do you replace a wheel bearing on a kawasaki mule 3010?
You can replace the front wheel bearing, on your Kawasaki Mule 3010, by removing the axle. With the axle Remove the wheel bearing will slide off.
How do you replace rear bearing on 1997 Ford Ranger?
you will have to have the axle pulled at a shop.the bearing slides along the axle shaft and seats in the axle housing.
Why does th rearend in a 96 Cherokee roar?
Possibly low of lube, or worn ring gear and pinion. Another possiblility is a defective wheel bearing or axle bearing.
How do you replace the rear wheel bearings on a 1996 gmc jimmy 4 wheel drive?
-Raise and support the vehicle. -Remove rear wheels and disc brakes or drums . -Drain differential oil. Remove differential cover. -In the differential housing there is an 8mm lock bolt that holds the pinion shaft in place remove that. -Remove the pinion shaft. -Remove the C-lock from the button end of the axle shaft. For that you will have to push in on the axle shaft. It will move freely with the pinion shaft out. The pinion shaft holds the two axle shafts apart. -With the C-lock out you can pull the axle shaft out. - You will need an axle bearing puller to remove the bearing. Pull the bearing and the oil seal out. -Clean everything nice and neat with brake parts cleaner. Wipe with clean towel. -Install new bearing and oil seal. You will need a bearing and race setter. (It helps to freeze the bearing before installation.) -Install the clean axle shaft. -Install C-lock. -Install pinion shaft. -Install pinion shaft lock bolt. Use blue thread locker paste so it doesn't come loose from the vibration. -Remove the remaining of the gasket from the differential and pan. Use a razor blade don't scratch it. -Install gasket and differential cover. -Add the differential oil. -Install brake rotors or drums, tires. If you have any doubts take it to a shop. You have to be really precise.
How do you remove an axle bearing on a 2003 ford crown Victoria?
If you are talking about the rear axle bearing you have to open cover on rearend ( differential) You`ll see a small bolt on pinion gear shaft. Remove it. You mave have to put vehicle in nuetral to turn rearend gears to slide pinion gear shaft out of the way.There are 2 c-clip like things that slide out. This will allow axle`s to slide out of rearend. Now you have to go to auto-zone or wherever and rent a bearing puller to remove bearing from rearend.
Why is 8.8 ford pinion yolk loose on rear axle?
It's wore out, so now it loose and the bearing needs to be replaced O
What would it be if the front axle on a 99 Tahoe makes a growling noise?
could be ring and pinion or a bad u-joint or a wheel bearing
