My 1993 seville, only the right half of the truck brake light works, how do I repair it ?
Thank you Bruce
there is a fusebox in the trunk (on lefthand wall).
check high mount brake wiring from trunk...
You can access the brake light bald through the trunk compartment. Remove the trunk liner from the tail light assembly. Push the brake light connector in and turn at the same time. The brake lightbulb will come out. Reverse the process to install the new brake light
Number 7 fuse on the right brake light in the trunk fuse box number 5 for the left side brake light also in the trunk.
Brake light, on your 2000 Chrysler Concorde, by accessing it from the inside of the trunk. Take hold of the brake light, push in and turn. The brake light will come out.
fuse might be bad
The brake light bald can be accessed through the trunk of the car. Remove the rear tail light cover to access the brake light bulb.
Remove the 3 nuts from behind the light housing in the trunk. Gently work housing free. You only need to change the bulbs that are dead.
under hood and trunk of car
From inside the trunk.
From inside the trunk.
Inside the trunk there is a turnable thumb screws where the brake lights are. Twist screws off and the brake light pops out.