Replace the four capacitors in the computer or replace the computer itself
when the engine is hot the check engine light came on and the fan(is ok) don't start
Simply turn on the ignition but do not attempt to start the engine. If the light bulb is good you will see the Check Engine light illuminate and stay on. If you do not see the Check Engine light, the bulb is defective or has been removed.
The computer doesn't allow to start the engine. Check the error code.
If the light stays on after start up- you need to check your oil.
There are pages and pages of things that can cause a check engine light. You need to have it checked with a scantool. Then the code can be diagnosed and repaired.
Check engine light, low power, no start, runs rough, bent valves,Check engine light, low power, no start, runs rough, bent valves,
yes
There are pages and pages of things that can cause a check engine light. You need to have it checked with a scantool. Then the code can be diagnosed and repaired.
The check engine light comes on at start up for a bulb check. If it stays on with the engine running the computer has detected a malfunction. You need to have it checked for codes.
The process of elimination works. If you have a check engine light, start there.
The light should stay on whenever the key is on and the engine is off.
start with engine off. press and hold that speedometer resetter while starting engine, check engine light will flash a few times then disappear.