0
The factory keyless entry code can't be erased because you have to enter that
code to make any changes to your personal code etc . The only way I can think of
changing the factory code is to change the RAP module in the wheel jack storage
compartment in your cargo area ( I'm not a mechanic / technician - just a guess )
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
Can you change the personal entry code on 2003 explorer sport trac?
Yes You can view the 2003 Ford Explorer Sport Trac owners manual online at : www . motorcraft service . com ( no spaces ) Click on Owner Guides ( keyless entry instructions start on page 65 , putting in a second personal entry code will erase the first personal entry code but not the factory code )
How do you reprogram a keyless remote entry?
A Navigator's keyless entry code can be changed by entering your 5 digit factory-given code, pressing 1/2 (within 5 seconds) and then entering your own personal 5 digit code. This doesn't erase the factory code. Hint: Do not use all same numbers.
How can you reprogram the keyless entry code on your ford explorer?
KEYLESS ENTRY SYSTEM With the keyless entry keypad, you can: • lock or unlock the vehicle doors without using the key. Your vehicle has a factory set 5 digit code that operates the keyless entry system. You can also program your own 5 digit personal entry code. The factory-set code is located: • on the owner's wallet card in the glove compartment • or at your dealer. When pressing the controls on the keyless entry keypad, press the middle of the controls to ensure a good activation. This system will disable the power door lock controls. These will not work until the vehicle is disarmed. Programming your own personal entry code To program your own code: 5. Enter factory set code (keypad will illuminate when pressed). 6. Press 1/2 control within five seconds of step 1. 7. Enter your personal 5 digit code. Enter each digit within five seconds of previous one. 8. After the code is entered, the locks will cycle, confirming that the new code has been set. Do not set a code that includes five of the same number or presents them in sequential order. Thieves can easily figure out these types of codes. Your personal code does not replace the permanent code that the dealership gave you. You can use either code to unlock your vehicle. If a second personal code is entered, the module will erase the first personal code in favor of the new code. Locks and Security 149 Locks and Security If you wish to erase your personal code, use the following instructions: 1. Enter factory set code. 2. Press 1/2 control and release. The system will now only respond to the factory set code. Anti-scan featureThe anti-scan feature prevents repeated attempts at arriving at a valid key code. The keyless entry pad is disabled for 1 minute after 7 unsuccessful attempts (35 consecutive button presses) at entering a valid key code. The keypad will flash during this 1 minute mode. However, the 7/8 and 9/0 controls will still lock the vehicle. Anti-scan will be turned off after: • one minute of keypad inactivity. • the remote entry transmitter UNLOCK button is pressed. • the ignition is turned to the ON position. Unlocking the doors with the keyless entry system To unlock the driver door, enter either the factory set code or the personal code (each digit must be pressed within five seconds of the prior digit). The interior lamps will also illuminate. To unlock all doors, enter the factory set code or personal code (driver door unlocks) and press the 3/4 control within five seconds. Locking the doors with the keyless entry system It is not necessary to enter the factory or personal code prior to locking all doors. To lock the doors: • with the driver's door closed, press the 7/8 control and the 9/0 control at the same time. Locks and Security 150
How does a 1997 ford explorer key less entry program work?
KEYLESS ENTRY SYSTEMWith the keyless entry keypad, you can:• lock or unlock the vehicle doorswithout using the key.Your vehicle has a factory set 5 digitcode that operates the keyless entrysystem. You can also program yourown 5 digit personal entry code. The factory-set code is located:• on the owner's wallet card in the glove compartment• or at your dealer.When pressing the controls on the keyless entry keypad, press themiddle of the controls to ensure a good activation.This system will disable the power door lock controls. These will notwork until the vehicle is disarmed.Programming your own personal entry codeTo program your own code:5. Enter factory set code (keypad will illuminate when pressed).6. Press 1/2 control within five seconds of step 1.7. Enter your personal 5 digit code.Enter each digit within five secondsof previous one.8. After the code is entered, thelocks will cycle, confirming that thenew code has been set.Do not set a code that includes five of the same number or presentsthem in sequential order. Thieves can easily figure out these types ofcodes.Your personal code does not replace the permanent code that thedealership gave you. You can use either code to unlock your vehicle. If asecond personal code is entered, the module will erase the first personalcode in favor of the new code.Locks and Security149Locks and SecurityIf you wish to erase your personal code, use the following instructions:1. Enter factory set code.2. Press 1/2 control and release.The system will now only respondto the factory set code.Anti-scan featureThe anti-scan feature preventsrepeated attempts at arriving at a valid key code.The keyless entry pad is disabled for 1 minute after 7 unsuccessfulattempts (35 consecutive button presses) at entering a valid key code.The keypad will flash during this 1 minute mode. However, the 7/8 and9/0 controls will still lock the vehicle.Anti-scan will be turned off after:• one minute of keypad inactivity.• the remote entry transmitter UNLOCK button is pressed.• the ignition is turned to the ON position.Unlocking the doors with the keyless entry systemTo unlock the driver door, enter either the factory set code or thepersonal code (each digit must be pressed within five seconds of theprior digit). The interior lamps will also illuminate.To unlock all doors, enter the factory set code or personal code (driverdoor unlocks) and press the 3/4 control within five seconds.Locking the doors with thekeyless entry systemIt is not necessary to enter thefactory or personal code prior tolocking all doors. To lock the doors:• with the driver's door closed, press the 7/8 control and the 9/0 controlat the same time.Locks and Security150
How do you reset 2002 ford explorer key less entry pad?
KEYLESS ENTRY SYSTEMWith the keyless entry keypad, you can:• lock or unlock the vehicle doorswithout using the key.Your vehicle has a factory set 5 digitcode that operates the keyless entrysystem. You can also program yourown 5 digit personal entry code. The factory-set code is located:• on the owner's wallet card in the glove compartment• or at your dealer.When pressing the controls on the keyless entry keypad, press themiddle of the controls to ensure a good activation.This system will disable the power door lock controls. These will notwork until the vehicle is disarmed.Programming your own personal entry codeTo program your own code:5. Enter factory set code (keypad will illuminate when pressed).6. Press 1/2 control within five seconds of step 1.7. Enter your personal 5 digit code.Enter each digit within five secondsof previous one.8. After the code is entered, thelocks will cycle, confirming that thenew code has been set.Do not set a code that includes five of the same number or presentsthem in sequential order. Thieves can easily figure out these types ofcodes.Your personal code does not replace the permanent code that thedealership gave you. You can use either code to unlock your vehicle. If asecond personal code is entered, the module will erase the first personalcode in favor of the new code.Locks and Security149Locks and SecurityIf you wish to erase your personal code, use the following instructions:1. Enter factory set code.2. Press 1/2 control and release.The system will now only respondto the factory set code.Anti-scan featureThe anti-scan feature preventsrepeated attempts at arriving at a valid key code.The keyless entry pad is disabled for 1 minute after 7 unsuccessfulattempts (35 consecutive button presses) at entering a valid key code.The keypad will flash during this 1 minute mode. However, the 7/8 and9/0 controls will still lock the vehicle.Anti-scan will be turned off after:• one minute of keypad inactivity.• the remote entry transmitter UNLOCK button is pressed.• the ignition is turned to the ON position.Unlocking the doors with the keyless entry systemTo unlock the driver door, enter either the factory set code or thepersonal code (each digit must be pressed within five seconds of theprior digit). The interior lamps will also illuminate.To unlock all doors, enter the factory set code or personal code (driverdoor unlocks) and press the 3/4 control within five seconds.Locking the doors with thekeyless entry systemIt is not necessary to enter thefactory or personal code prior tolocking all doors. To lock the doors:• with the driver's door closed, press the 7/8 control and the 9/0 controlat the same time.Locks and Security150
Where is the Factory pre-set code for the keyless pad entry on a 2008 Ford Expedition?
KEYLESS ENTRY SYSTEM With the keyless entry keypad, you can: • lock or unlock the vehicle doors without using the key. Your vehicle has a factory set 5 digit code that operates the keyless entry system. You can also program your own 5 digit personal entry code. The factory-set code is located: • on the owner's wallet card in the glove compartment • or at your dealer. When pressing the controls on the keyless entry keypad, press the middle of the controls to ensure a good activation. This system will disable the power door lock controls. These will not work until the vehicle is disarmed. Programming your own personal entry code To program your own code: 5. Enter factory set code (keypad will illuminate when pressed). 6. Press 1/2 control within five seconds of step 1. 7. Enter your personal 5 digit code. Enter each digit within five seconds of previous one. 8. After the code is entered, the locks will cycle, confirming that the new code has been set. Do not set a code that includes five of the same number or presents them in sequential order. Thieves can easily figure out these types of codes. Your personal code does not replace the permanent code that the dealership gave you. You can use either code to unlock your vehicle. If a second personal code is entered, the module will erase the first personal code in favor of the new code. Locks and Security 149 Locks and Security If you wish to erase your personal code, use the following instructions: 1. Enter factory set code. 2. Press 1/2 control and release. The system will now only respond to the factory set code. Anti-scan featureThe anti-scan feature prevents repeated attempts at arriving at a valid key code. The keyless entry pad is disabled for 1 minute after 7 unsuccessful attempts (35 consecutive button presses) at entering a valid key code. The keypad will flash during this 1 minute mode. However, the 7/8 and 9/0 controls will still lock the vehicle. Anti-scan will be turned off after: • one minute of keypad inactivity. • the remote entry transmitter UNLOCK button is pressed. • the ignition is turned to the ON position. Unlocking the doors with the keyless entry system To unlock the driver door, enter either the factory set code or the personal code (each digit must be pressed within five seconds of the prior digit). The interior lamps will also illuminate. To unlock all doors, enter the factory set code or personal code (driver door unlocks) and press the 3/4 control within five seconds. Locking the doors with the keyless entry system It is not necessary to enter the factory or personal code prior to locking all doors. To lock the doors: • with the driver's door closed, press the 7/8 control and the 9/0 control at the same time. Locks and Security 150
To reprogram keyless entry on door not fob?
KEYLESS ENTRY SYSTEMWith the keyless entry keypad, you can:• lock or unlock the vehicle doorswithout using the key.Your vehicle has a factory set 5 digitcode that operates the keyless entrysystem. You can also program yourown 5 digit personal entry code. The factory-set code is located:• on the owner's wallet card in the glove compartment• or at your dealer.When pressing the controls on the keyless entry keypad, press themiddle of the controls to ensure a good activation.This system will disable the power door lock controls. These will notwork until the vehicle is disarmed.Programming your own personal entry codeTo program your own code:5. Enter factory set code (keypad will illuminate when pressed).6. Press 1/2 control within five seconds of step 1.7. Enter your personal 5 digit code.Enter each digit within five secondsof previous one.8. After the code is entered, thelocks will cycle, confirming that thenew code has been set.Do not set a code that includes five of the same number or presentsthem in sequential order. Thieves can easily figure out these types ofcodes.Your personal code does not replace the permanent code that thedealership gave you. You can use either code to unlock your vehicle. If asecond personal code is entered, the module will erase the first personalcode in favor of the new code.Locks and Security149Locks and SecurityIf you wish to erase your personal code, use the following instructions:1. Enter factory set code.2. Press 1/2 control and release.The system will now only respondto the factory set code.Anti-scan featureThe anti-scan feature preventsrepeated attempts at arriving at a valid key code.The keyless entry pad is disabled for 1 minute after 7 unsuccessfulattempts (35 consecutive button presses) at entering a valid key code.The keypad will flash during this 1 minute mode. However, the 7/8 and9/0 controls will still lock the vehicle.Anti-scan will be turned off after:• one minute of keypad inactivity.• the remote entry transmitter UNLOCK button is pressed.• the ignition is turned to the ON position.Unlocking the doors with the keyless entry systemTo unlock the driver door, enter either the factory set code or thepersonal code (each digit must be pressed within five seconds of theprior digit). The interior lamps will also illuminate.To unlock all doors, enter the factory set code or personal code (driverdoor unlocks) and press the 3/4 control within five seconds.Locking the doors with thekeyless entry systemIt is not necessary to enter thefactory or personal code prior tolocking all doors. To lock the doors:• with the driver's door closed, press the 7/8 control and the 9/0 controlat the same time.Locks and Security150
How do you use the keyless entry keypad?
KEYLESS ENTRY SYSTEMWith the keyless entry keypad, you can:• lock or unlock the vehicle doorswithout using the key.Your vehicle has a factory set 5 digitcode that operates the keyless entrysystem. You can also program yourown 5 digit personal entry code. The factory-set code is located:• on the owner's wallet card in the glove compartment• or at your dealer.When pressing the controls on the keyless entry keypad, press themiddle of the controls to ensure a good activation.This system will disable the power door lock controls. These will notwork until the vehicle is disarmed.Programming your own personal entry codeTo program your own code:5. Enter factory set code (keypad will illuminate when pressed).6. Press 1/2 control within five seconds of step 1.7. Enter your personal 5 digit code.Enter each digit within five secondsof previous one.8. After the code is entered, thelocks will cycle, confirming that thenew code has been set.Do not set a code that includes five of the same number or presentsthem in sequential order. Thieves can easily figure out these types ofcodes.Your personal code does not replace the permanent code that thedealership gave you. You can use either code to unlock your vehicle. If asecond personal code is entered, the module will erase the first personalcode in favor of the new code.Locks and Security149Locks and SecurityIf you wish to erase your personal code, use the following instructions:1. Enter factory set code.2. Press 1/2 control and release.The system will now only respondto the factory set code.Anti-scan featureThe anti-scan feature preventsrepeated attempts at arriving at a valid key code.The keyless entry pad is disabled for 1 minute after 7 unsuccessfulattempts (35 consecutive button presses) at entering a valid key code.The keypad will flash during this 1 minute mode. However, the 7/8 and9/0 controls will still lock the vehicle.Anti-scan will be turned off after:• one minute of keypad inactivity.• the remote entry transmitter UNLOCK button is pressed.• the ignition is turned to the ON position.Unlocking the doors with the keyless entry systemTo unlock the driver door, enter either the factory set code or thepersonal code (each digit must be pressed within five seconds of theprior digit). The interior lamps will also illuminate.To unlock all doors, enter the factory set code or personal code (driverdoor unlocks) and press the 3/4 control within five seconds.Locking the doors with thekeyless entry systemIt is not necessary to enter thefactory or personal code prior tolocking all doors. To lock the doors:• with the driver's door closed, press the 7/8 control and the 9/0 controlat the same time.Locks and Security150
How do you program Keyless entry remote for 2006 Hummer H1?
Try this. I got it from Ford...KEYLESS ENTRY SYSTEMWith the keyless entry keypad, you can:• lock or unlock the vehicle doorswithout using the key.Your vehicle has a factory set 5 digitcode that operates the keyless entrysystem. You can also program yourown 5 digit personal entry code. The factory-set code is located:• on the owner's wallet card in the glove compartment• or at your dealer.When pressing the controls on the keyless entry keypad, press themiddle of the controls to ensure a good activation.This system will disable the power door lock controls. These will notwork until the vehicle is disarmed.Programming your own personal entry codeTo program your own code:5. Enter factory set code (keypad will illuminate when pressed).6. Press 1/2 control within five seconds of step 1.7. Enter your personal 5 digit code.Enter each digit within five secondsof previous one.8. After the code is entered, thelocks will cycle, confirming that thenew code has been set.Do not set a code that includes five of the same number or presentsthem in sequential order. Thieves can easily figure out these types ofcodes.Your personal code does not replace the permanent code that thedealership gave you. You can use either code to unlock your vehicle. If asecond personal code is entered, the module will erase the first personalcode in favor of the new code.Locks and Security149Locks and SecurityIf you wish to erase your personal code, use the following instructions:1. Enter factory set code.2. Press 1/2 control and release.The system will now only respondto the factory set code.Anti-scan featureThe anti-scan feature preventsrepeated attempts at arriving at a valid key code.The keyless entry pad is disabled for 1 minute after 7 unsuccessfulattempts (35 consecutive button presses) at entering a valid key code.The keypad will flash during this 1 minute mode. However, the 7/8 and9/0 controls will still lock the vehicle.Anti-scan will be turned off after:• one minute of keypad inactivity.• the remote entry transmitter UNLOCK button is pressed.• the ignition is turned to the ON position.Unlocking the doors with the keyless entry systemTo unlock the driver door, enter either the factory set code or thepersonal code (each digit must be pressed within five seconds of theprior digit). The interior lamps will also illuminate.To unlock all doors, enter the factory set code or personal code (driverdoor unlocks) and press the 3/4 control within five seconds.Locking the doors with thekeyless entry systemIt is not necessary to enter thefactory or personal code prior tolocking all doors. To lock the doors:• with the driver's door closed, press the 7/8 control and the 9/0 controlat the same time.Locks and Security150
How can you change the keyless entry code for an expedition?
KEYLESS ENTRY SYSTEMWith the keyless entry keypad, you can:• lock or unlock the vehicle doorswithout using the key.Your vehicle has a factory set 5 digitcode that operates the keyless entrysystem. You can also program yourown 5 digit personal entry code. The factory-set code is located:• on the owner's wallet card in the glove compartment• or at your dealer.When pressing the controls on the keyless entry keypad, press themiddle of the controls to ensure a good activation.This system will disable the power door lock controls. These will notwork until the vehicle is disarmed.Programming your own personal entry codeTo program your own code:5. Enter factory set code (keypad will illuminate when pressed).6. Press 1/2 control within five seconds of step 1.7. Enter your personal 5 digit code.Enter each digit within five secondsof previous one.8. After the code is entered, thelocks will cycle, confirming that thenew code has been set.Do not set a code that includes five of the same number or presentsthem in sequential order. Thieves can easily figure out these types ofcodes.Your personal code does not replace the permanent code that thedealership gave you. You can use either code to unlock your vehicle. If asecond personal code is entered, the module will erase the first personalcode in favor of the new code.Locks and Security149Locks and SecurityIf you wish to erase your personal code, use the following instructions:1. Enter factory set code.2. Press 1/2 control and release.The system will now only respondto the factory set code.Anti-scan featureThe anti-scan feature preventsrepeated attempts at arriving at a valid key code.The keyless entry pad is disabled for 1 minute after 7 unsuccessfulattempts (35 consecutive button presses) at entering a valid key code.The keypad will flash during this 1 minute mode. However, the 7/8 and9/0 controls will still lock the vehicle.Anti-scan will be turned off after:• one minute of keypad inactivity.• the remote entry transmitter UNLOCK button is pressed.• the ignition is turned to the ON position.Unlocking the doors with the keyless entry systemTo unlock the driver door, enter either the factory set code or thepersonal code (each digit must be pressed within five seconds of theprior digit). The interior lamps will also illuminate.To unlock all doors, enter the factory set code or personal code (driverdoor unlocks) and press the 3/4 control within five seconds.Locking the doors with thekeyless entry systemIt is not necessary to enter thefactory or personal code prior tolocking all doors. To lock the doors:• with the driver's door closed, press the 7/8 control and the 9/0 controlat the same time.Locks and Security150
How can you Change the keyless entry code 1997 mercury mountaineer?
KEYLESS ENTRY SYSTEMWith the keyless entry keypad, you can:• lock or unlock the vehicle doorswithout using the key.Your vehicle has a factory set 5 digitcode that operates the keyless entrysystem. You can also program yourown 5 digit personal entry code. The factory-set code is located:• on the owner's wallet card in the glove compartment• or at your dealer.When pressing the controls on the keyless entry keypad, press themiddle of the controls to ensure a good activation.This system will disable the power door lock controls. These will notwork until the vehicle is disarmed.Programming your own personal entry codeTo program your own code:5. Enter factory set code (keypad will illuminate when pressed).6. Press 1/2 control within five seconds of step 1.7. Enter your personal 5 digit code.Enter each digit within five secondsof previous one.8. After the code is entered, thelocks will cycle, confirming that thenew code has been set.Do not set a code that includes five of the same number or presentsthem in sequential order. Thieves can easily figure out these types ofcodes.Your personal code does not replace the permanent code that thedealership gave you. You can use either code to unlock your vehicle. If asecond personal code is entered, the module will erase the first personalcode in favor of the new code.Locks and Security149Locks and SecurityIf you wish to erase your personal code, use the following instructions:1. Enter factory set code.2. Press 1/2 control and release.The system will now only respondto the factory set code.Anti-scan featureThe anti-scan feature preventsrepeated attempts at arriving at a valid key code.The keyless entry pad is disabled for 1 minute after 7 unsuccessfulattempts (35 consecutive button presses) at entering a valid key code.The keypad will flash during this 1 minute mode. However, the 7/8 and9/0 controls will still lock the vehicle.Anti-scan will be turned off after:• one minute of keypad inactivity.• the remote entry transmitter UNLOCK button is pressed.• the ignition is turned to the ON position.Unlocking the doors with the keyless entry systemTo unlock the driver door, enter either the factory set code or thepersonal code (each digit must be pressed within five seconds of theprior digit). The interior lamps will also illuminate.To unlock all doors, enter the factory set code or personal code (driverdoor unlocks) and press the 3/4 control within five seconds.Locking the doors with thekeyless entry systemIt is not necessary to enter thefactory or personal code prior tolocking all doors. To lock the doors:• with the driver's door closed, press the 7/8 control and the 9/0 controlat the same time.Locks and Security150
Your keyless entry on your 1999 ford expedition has know power going to it you checked all of your fuses and they are good you need help?
What kind of help do you need? Here is some information that may help; KEYLESS ENTRY SYSTEM With the keyless entry keypad, you can: • lock or unlock the vehicle doors without using the key. Your vehicle has a factory set 5 digit code that operates the keyless entry system. You can also program your own 5 digit personal entry code. The factory-set code is located: • on the owner's wallet card in the glove compartment • or at your dealer. When pressing the controls on the keyless entry keypad, press the middle of the controls to ensure a good activation. This system will disable the power door lock controls. These will not work until the vehicle is disarmed. Programming your own personal entry code To program your own code: 5. Enter factory set code (keypad will illuminate when pressed). 6. Press 1/2 control within five seconds of step 1. 7. Enter your personal 5 digit code. Enter each digit within five seconds of previous one. 8. After the code is entered, the locks will cycle, confirming that the new code has been set. Do not set a code that includes five of the same number or presents them in sequential order. Thieves can easily figure out these types of codes. Your personal code does not replace the permanent code that the dealership gave you. You can use either code to unlock your vehicle. If a second personal code is entered, the module will erase the first personal code in favor of the new code. Locks and Security 149 Locks and Security If you wish to erase your personal code, use the following instructions: 1. Enter factory set code. 2. Press 1/2 control and release. The system will now only respond to the factory set code. Anti-scan feature The anti-scan feature prevents repeated attempts at arriving at a valid key code. The keyless entry pad is disabled for 1 minute after 7 unsuccessful attempts (35 consecutive button presses) at entering a valid key code. The keypad will flash during this 1 minute mode. However, the 7/8 and 9/0 controls will still lock the vehicle. Anti-scan will be turned off after: • one minute of keypad inactivity. • the remote entry transmitter UNLOCK button is pressed. • the ignition is turned to the ON position. Unlocking the doors with the keyless entry system To unlock the driver door, enter either the factory set code or the personal code (each digit must be pressed within five seconds of the prior digit). The interior lamps will also illuminate. To unlock all doors, enter the factory set code or personal code (driver door unlocks) and press the 3/4 control within five seconds. Locking the doors with the keyless entry system It is not necessary to enter the factory or personal code prior to locking all doors. To lock the doors: • with the driver's door closed, press the 7/8 control and the 9/0 control at the same time. Locks and Security 150
