answersLogoWhite

0


Best Answer

Make sure that the wires are correctly routed, plugs are good and fuel injectors are correct resistance and working.

User Avatar

Wiki User

16y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: 98 lumina 31 new head gaskets replaced got 8 codes all clear except for multiple misfire new plugs and wires with good spark but no power and runs like its on 3 or 4 cylinders any sugestions?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Can water get into the cylinders and oil through the intake manifold?

if you figure this out please call me i had the heads resurfaced and gaskets replaced and the same thing is happening to my f250 6.8l v10 1999 8317068926


What would make you have oil in your spark plug cylinders?

valve cover gaskets


Just replaced head gaskets on 96 tbird 6-cylinder now you get no fire to plugs but your coil reads 11 volts when cranking engine any sugestions?

Sounds like the coil. The high side of the coil should be 35~70 kilo volts. 11 volts will not jump the spark gap. http://www.marksatterfield.com


Who repairs head gaskets?

I was not aware that headgaskets were repairable. I have always replaced them with new gaskets. If you mean who replaces headgaskets, then that would be an engine mechanic.


What could cause a Chevy Monte Carlo to not pump coolant you have replaced the fans water pump thermostat and hose Please help?

i had to have my gaskets replaced ... ive heard the 3100 are known for being made with plastics gaskets ... idk


What is the best stuff to use for a blown headgasket?

Head gaskets can't be repaired. If they fail they have to be replaced.


What does it mean for message restricted performance on 2000 xk8 PS where are the spark plugs?

I recently had the same problem, the local Jaguar dealer, repaired Valve cover gaskets replaced. Oil leaked into the cylinders had to replace coils, plug, gasket, and few others parts. Over $2500 repair


What would cause a 1990 Jeep Cherokee Pioneer to overheat I've replaced the thermostat thermostat housing water pump and other miscellaneous stuff but I keep having overheating problems. What do I do?

have you had the head gaskets replaced you might have blown head gaskets or warped heads on the block this is a costly repair check your water for oil or check your oil for water this will help to determin if they are ... have you had the head gaskets replaced you might have blown head gaskets or warped heads on the block this is a costly repair check your water for oil or check your oil for water this will help to determin if they are ...


2000 s10 4.3L engine knocks after intake manifold gaskets replaced why?

Sounds like something was droped into the engine. I would also like to know why you changed the intake gasket. If it was leaking water/ engine coolant into the cylinders then you may have damaged / broke a piston are bent a rod. Water will not compress.


How do you stop a leak?

if its leaking from the head gaskets. The gaskets need to be replaced. If you dont have the proper tools it is going to be a huge pain. If leak continues try tightening the bolts around the headers and sparkplugs


Do you need to drop the engine to replace the head gaskets on a 1992 G20?

No, they can be replaced with the engine in the vehicle, but it is not an easy repair.


What would cause your 2001 Cadillac Catera to smoke and have a funny smell?

Rocker cover gaskets need to be replaced.