0
I think it's a 10mm.
Best to grab the small crescent/adjustable wrench too... That should cover it.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
How do you reset the computer on a 2002 ford taurus?
To reset the computer on a 2002 Ford Taurus disconnect the negative battery cable. Leave the battery cable disconnected for five to ten minutes. Reconnect the cable and start the car. The computer should be reset.
How do you change battery cable on 1999 ford Taurus?
Remove the old follow same routing to replace with new
Can I use a 700cca 120r battery for a 1998 Ford Taurus v6?
Ford Taurus
On a Ford Taurus if there is a bad alternator or not will the car DIE WHEN I REMOVE THE BATTERY CABLE?
You will destroy the voltage regulator if you unplug the battery while it is running, then you will have to replace the alternator anyways.
Removing difficult starter bolts on 1997 Ford Taurus?
If the starter bolts are difficult to remove on a 1997 Ford Taurus, they were probably put on using an air wrench. An air wrench can be used to remove them or a product called Liquid Wrench.
What is the procedure for adjusting the shift cable on a 97 Ford Taurus for PRNODD1?
The 1997 Ford Taurus shifting cable has adjustment swivel nuts on each end of the cable. You can turn the swivel nuts to lengthen or shorten the shifting cable.
How do you connect a battery cable on a 1999 Ford Escort Sport?
After removing the positive and negative cable, follow the negative cable to where it's grounded to the wheel well. Remove the end of the cable with the wrench. Track the positive cable to its connection on the driver's side of the engine and remove it with the wrench. Now, attach the new positive cable first and install the negative cable last and start the car to ensure that the connections are working on your Ford Escort.
What size battery for a 1997 Ford Taurus?
36R
What volt battery does a Ford Taurus take?
12v
Does a 1999 Ford Taurus have a cable on the speed sensor?
yes
How do you install a transmission speed sensor on a 2001 Ford Taurus?
disconnect negative cable to battery, disconnect plug from sensor, remove the 3 nuts and pull out.
What size wrench or tool do you need to take off a caliper on a 2001 Ford Taurus?
You need a 13mm box wrench.
