Remove the old follow same routing to replace with new
yes
The starter cable for the 99 Blazer is connected to the battery cable below the battery tray. A plastic box encloses a fuse that connects that battery cable to the starter cable and the chassis power.
Positive, hot, or + red cable.
how 2 change a 1999 speedo cable
Remove the positive cable from your 1999 Chevy battery. Remove the cables from the starter. Remove the starter retaining bolts. Reverse the process to install the new starter.
A battery terminal or a battery CABLE terminal. If the terminal is gone or destroyed on the battery, you need a new battery. If the cable terminal is terminal, you can buy an after market replacement or a complete new cable with terminal at most any auto parts store.
Unbolt it at each end, then release any retainers along the length of the cable. Do not allow any metal object to contact B+ and ground. Installation is reverse...
Good engine ground
It seems pretty soon for a starter to need replacement but remove the neg battery cable then the pos at the aatarter. Then the mounting bolts and work it out.
Start by removing the ground cable first(negative). Then remove the positive cable. At the base of the battery is a hold down clamp, held in by one bolt. Remove this and the battery will lift right out.
where do I find the battery on a 1999 Chrysler sebring, can't find it in the engine compartment?
its electronic. No cable