0
That will depend greatly on what kind of vehicle you are working on. Please ask a new question with year, make and model listed along with the question.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
What size are the brake caliper bolts on a 2000 Monte Carlo?
.The 2000 Chevrolet Monte Carlo brake caliper bolt size is 9/16. The brake caliper bolt can be purchased at most auto-parts stores
What size bolt connects the brake line to the brake caliper on a 1987 suzuki samurai?
The size is probably an half inch bolt to 3/4 bolt.
What size are the rear brake caliper bolt for Lexus ls 430 2004 for tap size?
Take the caliper to a machine shop and have the broken bolt removed or just replace the caliper. If you do not understand the bolt sizing, you are not equipped to retap the caliper.
What is the brake caliper bolt size on a 2000 Chevrolet truck?
A 3/8" Allen wrench will remove that bolt on the front caliper.
What size wrench to remove brake caliper bolt on 2002 gmc Yukon?
18mm
What size are the bolts on the brake caliper of a Chevy Trail Blazer?
size of bolt on break calliber on Chevy trailblazer
What size is the brake caulaber bolts on 93 Chevy Lumina?
15 mm is the size,for caliper bolts caliper bracket bolt is t60(it is star shaped)
What size is the bolt to the brake caliper for 1994 Cadillac sedan deville?
The Rear Caliper Bottom Bolt head size is 12 mm. The Top bolt is enclosed only making it a slide bolt therefore you cant and really have no need to remove it. So the only bolt you should remove is the bottom 12mm head bolt. Then there will be a 14mm bolt that will hold the Emergency Brake Cable Bracket to the Caliper. Loosen this bolt and remove the Emergency Brake Cable Bracket from the Caliper. Then pry the bottom of the caliper up off the disc. This will allow you to swing the caliper up then push the caliper back to slide the caliper off the enclosed bolt slide at the top of the caliper. This will allow access to the inside and outside pads to remove them and allow you to press and rotate the Piston (Push and Twist-in Pistons) back into the Caliper with the right Brake Caliper Compression tool. The rear two Caliper Bracket bolt head sizes are 18mm. You must remove the Caliper bracket in order to remove the rear brake disc. The Front Brake Caliper Bolt is a 3/8" Allen head bolt. There will be two bolts holding the front calipers to the Spindle. The Front calipers are standard push-in Pistons.
Brake caliper bolt Toyota matrix size?
m8-1.0x 20mm I just replaced mine, it was the top bolt
What size hex bit is used on a 2002 GMC Sonoma brake Caliper bolt?
3/8"
What size hex is needed to remove brake caliper on 2008 Ford Expedition LT?
The size is 9mm hex. It needs to be long enough to reach the recessed caliper bolt.
What size is the bolt on a 2004 dodge neon brake caliper?
not sure of actual size,but it is a metric size so ordinary wrenches will not fit
