0
Can crankcase oil migrate into the bell housing and contaminate the clutch?
Wiki User
∙ 13y ago
Absolutely!.
If the rear seal on the crankshaft is leaking the oil from the engine can migrate to the bell housing and the clutch. It is also possible that the front seal on the transmission can leak and migrate to the clutch.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
Where is a Polaris scrambler starter located?
Under the air filter box, above the engine crankcase, behind the belt/clutch housing.
What are the parts of a gasoline powered internal combustion engine?
it is the carborator > Following the fuel: Carburettor > intake valve > Combustion chamber > Burned > exhaust valve > exhaust pipe. Following the power: Piston > con rod > crankshaft > clutch > gearbox > wheels. Containers: cylinder head > cylinder barrel > crankcase > clutch housing > gearbox housing.
What type of oil goes in the crankcase of a kx100?
80w wet clutch
Where is the bell housing to disengage the clutch?
The bell housing surrounds the clutch assembly. Mounted between the engine and the transmission.
What kind of clutch fluid does a warrior 350 take?
warrior 350 runs on wet clutch, the crankcase oil lubes the clutches
What else is a bell housing called?
Clutch housing, torque converter housing
Where is the slave cylinder located on a 94 geo prism?
It is mounted to the clutch housing. Have someone push on the clutch pedal and follow the movement of the cable. From the driver side look down towars the clutch housing, it is on top.
How do you replace a clutch on a 2001 Ford Focus SE?
First remove front axels, then remove the transmission, undo clutch bell housing. Add on new clutch pressure plate.....new clutch bell housing......put the transmission back in and axels
What does increase decrease screw do on side of crankcase by pull start on Yamaha big bear 350?
adjest clutch
Is it possible that the mechanic who replaced my clutch cracked the thermostat housing accidentally?
Don't know what kind of vehicle you have but a thermostat housing and the clutch are not connected in any way. Need more info.
What is a clutch linkage?
The rods that go from the peddle through the firewall to the bell housing on the transmission to engage /disingage the clutch
Where is the bell housing on a Jeep?
The bell housing is the part of the transmission case that bolts to the engine. The bell housing contains the clutch or torque converter.
