The oi pump is on the nose of the crank shaft, so the timing cover has to be off along with the oil pan. The engine will need lifted to remove the oil pan.
As long as there is oil in the engine it can run. If it has not had an oil change for a year even if it was stored I would change the oil/filter before driving this car.
" without having to change anything " NO !
Yes, you do not need to remove the engine.
No, the 390 uses a C6 transmission and the 289 uses a smaller C4.
Not having enough oil.
Yes
Theres bound to be changes but for the most part the only think it comes to mined Motor Mounts.
I would use 47 and 21. It is easy enough to add them without having to waste time with estimates.I would use 47 and 21. It is easy enough to add them without having to waste time with estimates.I would use 47 and 21. It is easy enough to add them without having to waste time with estimates.I would use 47 and 21. It is easy enough to add them without having to waste time with estimates.
no,not really
Because without it the computer would not work. It is pretty much the same as having an engine in a car.
no not at all not enough room.if it's standered and you need to replace the clutch you have just enough room to remove and install the clutch remember cut the clutch tool in half
99