can you be hurt by 110v
The fact that it's supposed to. Voltage is stated as the difference between the two wires carrying electricity to the load. When they bring power to the house from the utility, you get two wires carrying 110v but they're 180 degrees out of phase. Imagine one carries positive 110v and the other carries negative 110v. If you hook one of these wires plus a neutral (zero volts) to the load, you get 110v--110v over 0v. If you hook both of them to the load, you get positive 110v over negative 110v, or 220v. So...red to white is 110v, black to white is 110v, red to black is 220v.
Use a transformer to lower from 220 to 110V.
I think the 110V was made in the late 80's I've been told anywhere between 1987 and 1989.
15 amps X 415volts = 6225watts or 6.225Kw
No you can't use a 415v motor in a 240 v socket.
can you be hurt by 110v
415v air circuit breaker acceptable value of 0.01 ohms and lessthan
The fact that it's supposed to. Voltage is stated as the difference between the two wires carrying electricity to the load. When they bring power to the house from the utility, you get two wires carrying 110v but they're 180 degrees out of phase. Imagine one carries positive 110v and the other carries negative 110v. If you hook one of these wires plus a neutral (zero volts) to the load, you get 110v--110v over 0v. If you hook both of them to the load, you get positive 110v over negative 110v, or 220v. So...red to white is 110v, black to white is 110v, red to black is 220v.
no
Current shall increase while you apply 415V for operating it and will decrease the rpm to a much low level.
Use a transformer to lower from 220 to 110V.
In India its 415V, 50Hz.
415V 3 phase is the line to line voltage. The line to neutral of this supply is 230V single phase. Therefore you use one of the phases and the neutral.
High and low voltage can be stabilizes in a 415V battery, by ensuring that it is being spread across the battery evenly. It is important that all of the energy not come from one area.
110v
110V