0
Any auto parts store, yes.
Wiki User
∙ 10y ago
Add your answer:
Earn +20 pts
How do replace the door spring on a 2003 Chevy s 10?
Your local auto parts store can sell you an inexpensive tool to remove and replace that door detente spring. Other hinge parts such as the pin and roller for the door detente and hinge pins and bushings are also available.
How do you adjust door lock on 1999 Chevy 1500?
It is hard to say what you want to "adjust". I assume your door is not lining up and you have to slam the door really hard to get it to close. This is not an adjustment problem, it is caused by worn hinge pins. You can pick up new hinge pins at any auto parts store for about $20.00.
How do you realign a door on a 2001 S-10 extended cab?
Start with replacing the door hinge pins and bushings. Pin and bushing kits are available at your local auto parts store.
Where can you get oversize door hinge pins for a 1996 gmc pu?
there is page thereAnswergo to www.oversize door hing pins .com Answergo to www.oversize door hing pins .com LMC TRUCK PARTS HAS THEM , also ORIELLYS AUTO PARTS.
How do you replace driver side door blazer s10?
Remove the inside door panel. Disconnect wire harness from inside of door and slide the harness out of the door. Remove door detent spring with proper tool (can be purchased from your local auto parts store for aprox $10). Support bottom of door with a jack or any suitable device.Remove retaining clips from door hinge pins. Have a friend hold the door upright while you drive out the hinge pins with a long punch and hammer. Once the pins are out the door can be removed. Reverse procedure to install. I would suggest replacing the pins and bushings with new ones. Once again these pins and bushings are available from your local auto parts store for cheap.
How do you adjust a S-10 truck door to close tight?
The door hinges are a weak point. The hinge pins and bushings wear out and cause the door to drop and close hard if at all. Start with replacing the hinge pins and bushings. Hinge pin kits are available at your local auto parts store. You'll need a special tool to R & R the door detent spring, they are cheap and it will keep you from busting your knuckles.
How do you adjust the door on 2002 Chevy s-10?
Replace the worn door hinge pins and bushings and the door should line up where it belongs. The pin and bushing kits are available from your local auto parts store.
How do you replace the driver side door of a1992 Chevy S10 blazer?
Remove the inside door panel. Disconnect wire harness from inside of door and slide the harness out of the door. Remove door detent spring with proper tool (can be purchased from your local auto parts store for aprox $10). Support bottom of door with a jack or any suitable device.Remove retaining clips from door hinge pins. Have a friend hold the door upright while you drive out the hinge pins with a long punch and hammer. Once the pins are out the door can be removed. Reverse procedure to install. I would suggest replacing the pins and bushings with new ones. Once again these pins and bushings are available from your local auto parts store for cheap.
How do you change the door hinge pins and bushings on a 1994 GMC 1500 pickup truck?
How do you change the door hinge pins and bushings on a 2002 GMC 1500 pickup truck?"
How to replace door hinge pins on 2002 blazer?
http://www.bodyshopzone.com/archives/mechanical/door/hinge/pin_replace_1.html
How do you change the door hinge pins and bushings on a 1995 firebird?
From what I was told, from the guy at the auto store, you can't. You have to replace the entire bracket.
What is the best way to tighten a loose drivers side door on a 1998 Blazer?
Likely needs the hinge pins and bushings replaced. Very common. Parts are very cheap and available at any parts store. Labor is not too bad, get a friend to help support the door.
