you can if you can weld. the axle mounts are not the same
According to the ( 1996 ) Ford Bronco Owner Guide : Axle code ( 19 ) is a Ford conventional ( non Ford Traction Lok / limited slip ) axle with a 3.55 ratio
How to remove the right side axle half on a 1995 f150
If the F-150 has the Ford E4OD transmission, then yes, it will fit into the Ford Bronco. If it has the E6 automatic, however, you may have some issues.
There the same so it should work, although I'd upgrade to a better axle.
yes
there should be an axle code or the door jam. Then you can call your local ford dealer and the can tell you, but some of the owner manuals had a list of the axle codes in them.
Yes , there was a 1995 full size Ford Bronco ( the last model year was 1996 )
1985-1988 ford f150 f250 and f350 or a 1994 f150 f250 and f350
how do you replace a Ford F150 rear axle seal
The slip yoke on the Ford Bronco is located on the rear axle rather than on the transfer case. This is the portion of the axle that allows it to flex.
no the bolt pattern is different and the bronco wheels would fit an f150 tho
The bolt pattern on a Ford Bronco or 1/2 truck (F150) is 5 on 5.5 (5/5.5).