0
Well you can if you want your seals to swell and become relaxed over time, and then eventually not have your slave cylinder, or even the hydraulic line not operate correctly. The Power Steering fluid I believe is mineral based and Brake fluid is glycol based (which your supposed to put into the system) and thus each fluid has a different chemical affect to the seals on this particular system.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
Where to add clutch fluid in 1988 F 250?
The fluid for the clutch comes from the brake fluid. After the brake master cylinder, there is a clutch master cylinder which takes fluid from the brakes. Fill up the Brake master cylinder.
What kind of fluid is in 300zx clutch?
There is no fluid in the clutch....The clutch master cylinder takes DOT 3 brake fluid. It is the same fluid that you put into the brake master cylinder
Where is 1995 escort clutch fluid located?
The clutch gets its fluid from the master brake cylinder reservoir. The master clutch cylinder sits just below the master brake cylinder reservoir and is fed fluid by gravity.
What kind of fluid is clutch fluid?
You put brake fluid for the clutch master cylinder
Where do you add fluid for clutch slave cylinder?
In the master cylinder
Where is the clutch fluid on a 1983 F100 located?
If it does not have a Hydraulic clutch, then it has no fluid. If it has a Hydraulic clutch the clutch master cylinder is normally located on the firewall, driver's side, near the brake master cylinder.
What if your clutch on your 85 Toyota corolla goes to the floor and is hard to shift?
There are two normal causes. The clutch is worn out or there is a leak in the hydraulic clutch slave or master cylinder. To check the clutch, press the clutch slave cylinder down. If the clutch slave cylinder bellows compresses down to the slave cylinder, the clutch is worn out. Check the clutch master cylinder fluid level. if this is low, then the clutch cylinder need to be checked. To check for a hydraulic leak in the clutch slave cylinder, remove the cylinder's bellows and check for any fluid. If fluid is present, rebuild or replace the cylinder and bleed the system. To check the clutch master cylinder, check the back the of clutch master cylinder for leaks. If fluid is present, replace or rebuild clutch master cylinder and bleed the system. In my experience, hydraulic leaks occur at the clutch slave cylinder.
Where do you put clutch fluid for 96 rodeo?
in the clutch master cylinder
Where is the clutch fluid reservoir for a 1993 jeep wrangler?
The Clutch fluid (same as break fluid) is located in the Master Cylinder directly in front of the steering column on the other side of the fire wall under the hood.
What fluid do you put in a clutch master cylinder?
DOT Brake Fluid.
Why is clutch fluid reservoire losing fluid in Chevy 1997 s10?
Either the clutch master cylinder or the clutch slave cylinder or the clutch hydraulic lines are leaking.
Where do you pour clutch fluid on a Toyota t-100?
In the clutch master cylinder next to the brake master.
