0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How do you remove the thermostat on a 2000 mercury villager without removing the timing belt?
There is no need to remove the timing belt to change the thermostat.
Is it safe to remove the ac compressor belt on a 95 mercury villager - What else does this belt turn?
shouldn't run anything else, my 94 doesnt.
Can you remove the AC belt on a 1991 Plymouth Laser 2.0 turbo and run the car without it?
Yes you could. That belt is only for the AC.
What is the serpentine belt 2003 impala?
you have to remove the belt tensioner to remove the belt off of the engine.
How do you remove the belt tensioner in a 2000 Cavalier?
Remove the serpentine belt and remove the alternator. The belt tensioner bolts are under the alternator.
How do you remove a deck belt from a white riding lawn mower?
It depends on the mower. Some you will need to remove the deck. Some you will have to remove the deck mounting brackets. Others will change without removing anything. For detailed info please ask again with the make and model of the mower.
1984 Nissan Pickupcan you drive without power steering belt And is the belt just for the power steering?
Look and see if it is driving anything else. As far as driving it without a belt, I would not advice you even attempt this. The steering would be extremely difficult and it would be dangerous. Buy a new belt and install it.
How to install a polaris ATV drive belt?
remove clutch cover. remove old belt. install new belt.
WHAT PULLEY DO I loosen to get single drive belt on?
If you are referring to the Serpentine belt, you loosen no pulley. You simply remove tension from the belt. The tension is applied by the Idler Pulley. Pry the idler back and remove the belt.If you are referring to the Serpentine belt, you loosen no pulley. You simply remove tension from the belt. The tension is applied by the Idler Pulley. Pry the idler back and remove the belt.
How do you replace murry mower belt.rear engine?
Remove four bolts that hold transaxle remove belt pulley and belt guard. remove shift linkage remove spring tensioner. then remove whole transaxle. Remove four bolts that hold transaxle remove belt pulley and belt guard. remove shift linkage remove spring tensioner. then remove whole transaxle.
How do you change the fan belt on a 97 geo tracker?
Loosen the component slide it towards the engine to lossen the belt, remove belt. Install in reverse. If the fan is your problem it is held on with 4 small bolts, remove them and the fan. P/S you should be able to work the belt around the fan blades without removing the fan. On_mitch
My AC belt busted. My AC has other issues and hasn't been used in years. Will it be fine without the belt though?
I believe the only thing that belt was driving is the AC compressor. Check to make sure that the belt wasn't turning anything else. If all it was driving was the compressor, and you don't need to use the ac, you can drive your car without that belt.
