Yes
It will turn when driving because it is still hooked to the front tires. The only disconnect is on the transfer case.
You can if you remove the rear drive shaft.
Its the rod from your front tire to the drive shaft their is one on each front tire
Yes.Yes.
The universal joints in the front driveshaft may be going bad.
the wheels ar always linked to the axle and the drive shaft the drive shaft is disconnected in the transfer case
The Prop shaft (front drive shaft) has a ball type cv joint that sits in bearings that connects to the transfer case. This is most likely shot and you need a front prop shaft (front drive shaft) complete with rubber boot and differential cv universal joint.
To permanently disable, remove the drive shaft from the transfer case to the front differential.
See if your drive shaft going to front end is bent.
If you did the drive shaft would not hook up and you would have no steering ability.
You need a different frame, trans, transfer case, drive shaft, front axle.
yes. you need to take out the front end and bolt it on. then take out te transfer case and front drive shaft.