Yes, you will need to change exhaust manifolds, exhaust tubing and intake tubings.
Yes but it is not worth it. The engines face opposite ways.
U can swap a turbo engine from japan that came in the blue bird which is called a altima in the US...
yes if the turboengen is the right size
Yes You can it is the same engine with the edition of a Turbo
keep yours. order a bottom end short block that's built. Low compression pistons and forged rods.. dont try to swap motors. Then get a turbo. a good ratio for a turbo 420a motor is 8.8:1 good luck.
nissan 300xz turbo
The turbo off the 300z will fit on the r32, not the manifold, only the turbo.
Yes you can you will need to get the non-turbo engine, non-t ECU and wire harness. The wire harness and ecu are diffrent between the t and the non t.
yes. both engines are the 4g63. the turbo engines from the 1990-1994 is a 6 bolt 4g63 and the turbo engine from the 1995-1999 is a 7 bolt 4g63.
The simple answer is yes. there are two engines in talons, lasers and eclipses. or better known as dsm's. (diamond star motors). there is the 4g63, and the 420a. which both come in turbo and non-turbo models. if you are looking to swap a turbo 4g63 into a non turbo 4g63 shell, the swap is simple. same as if your swapping a turbo 420a into a non turbo 420a shell. now, if your looking to swap a turbo 4g63into a nonturbo 420a or vise versa, you will encounter problems with motor mounts, wiring etc. keep in mind the wiring and ecu's etc will be different on each motor.
If you're looking to turbo an NA engine, it is very difficult and expensive for the amount of power you will get. Best option is to find a good engine from a Twin Turbo model and swap the entire thing.
yes, and if its turbo in the US, its been modded or gotten an engine swap.