0
Dont you know your engine blocks in twin cams its A or B. I wouldn't recomend it depending
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
Do a 83 caprice motor bolt up to a 86 cutlass transmission?
I think you will need to use the caprice tranny as the bolt holes are different on the olds tranny. Here is how it works if the motor is a Chevy you must use a tranny with the Chevy bolt patern. There is some trannys with both bolt pattern. (never seen one). If it is an olds motor you must use a BPO tranny. BPO is a Buick, Pontiac or Oldsmobile. I am sure that they do make adapter though (never seen one)
What motor oil and transmission fluid do you use on an automatic 2001 Honda Civic LX?
5w20 motor oil And for the tranny only use authentic Honda ATF.
Where do you add-check transmission fluid on the suzuki intruder 1400 and is there a specific kind to use?
most motorcycles do not have separate tranny fluid, the motor oil is also lube for tranny.
Can you use the same synth oil viscosity in both motor tranny harleydavidson 2008?
I understand you can use the same oil viscosity in both motor & transmission on the 2008 harley roadking!
What oil is in gearbox 1991 Dodge Shadow ES?
Depends...auto tranny's use Mopar ATF +3 Type 7176 or equivalent and manual tranny's use SAE 5W30 motor oil....or at least that is what the dealer recommends.
Will a h23 fit in a 1995 Honda civc?
Yes...to simply answer the question, it will indeed fit.It will require a little work though. It is beyond the scope of this "wiki answer" format to completely answer your question, but I'll give you a basic breakdown. Option 1: This option would be to swap an entire Hseries setup into the Civic. You would essentially source an Hseries tranny from a Prelude. Get a clutch and flywheel for the setup, along with all the associated bolt ons (alternator, intake mani, exhaust mani, etc). You'd then source an aftermarket mount kit from companies like Hasport or Enjo, which adapts the Hseries setup to the civic mounting system. That's the easy part. The harder part is, that the Hseries trannies use a cable shift linkage and your Civic uses a solid linkage. You must adapt to the cable linkage, so you need a shifter assembly from an Accord or Prelude. You must then remove your entire shifter from the Civic, cut a hole to mount the Accord assembly, then cut a hole for the cables to leave the interior, and head into the engine bay. You also then need to address axles. The easy combo is to use an intermediate shaft from an Accord and use 90-93 Integra axles. From there you'll take your STOCK civic harness and adapt it to the motor. Some lengthening will be required here and there, but an H23 is pretty straightforward. The only main issues will be adding knock sensor. From there you can run the setup with a chipped Civic ecu and use Civic style saturated injectors, or you can install a resistor box and run the H23 injectors. Option 2: This option requires you to buy a Bisimoto H2D kit. This will solve several issues, but also create some. The issues it solves is it eliminates the need for an Hseries tranny, and doing all the mods to mount shifter cables, and the Accord shifter assembly. What this kit does is basically allows your stock civic Dseries tranny bolt up to the H23. Your setup is then mounted with the stock Civic tranny mountings, but a custom made driver side mount. This also allows you to run your stock axles, which eliminates the binding issues experienced with an Hseries swapped Civic. The issues the kit DOES create though are all fitment related. Your gonna need to research what's required with the Bisimoto kit. It's not too complicated...people including myself have posted pictures and how to's on honda-tech.com. H2D kits and H2B kits are being heavily favored though, due to the inherent weak nature of Hseries synchro's, as well as the weight savings you experience. In my opinion full Hswaps are a thing of the past for the mostpart....H2D and H2B's are the way to go in most scenarios.
What kind of tranny fluid does a ford new holland ls55 lawn tractor use?
10-30 motor oil
Can you use motor plates to mount a motor in a dart?
i have a 1970 dodge dart with a slant 6, 225 and need to know if a 318 out of 1970 dodge dart will mount up with the motor mounts and tranny.
Will a 22r motor and bell housing fit on a tranny from a v6?
nope it well not work! unless u want to cut off both 22r n d v6 tranny bell housing n wield it to d tranny u want to use!
Can you use a 1986 Trans Am 5 speed tranny with a 1974 Chevy 350 motor What flywheel would you have to use?
You have to use the flywheel for the 1974 engine and the clutch plate for the Trans Am.
Is a 350ci an easy engine swap for 305ci in 1989 RS engine mounts and tranny mount is your concern?
it is a fairly simple swap motor mounts should be the same you can use the same tranny if you like or not mounts are the same
1975 Chevy truck with a blown motor my boss gave me 350 sbc boat motor will this work and if not why?
The original trans will be fine. The parts you need off your old motor is the carburetor and the fly wheel. If the new(er) motor happens to have EFI, don't use it. Just to make things much simplified. yes the 350 will bolt right in but i don't know about the tranny that's already in it you might have to get the Chevy 350 trans for the tranny to match motor but motor will fit
