# Disconnect negative battery cable # Drain cooling system # Loosen the hose clamps then detach the radiator hoses from the fittings # Disconnect the reservoir hose from the radiator filler neck # If the radiator is equipped with a finger guard remove it.If it has a shroud remove the screws that attach the shroud to the radiator and slide the shroud toward the engine # If the truck is a automatic disconnect the cooler lines from the radiator # Plug the lines and fittings to avoid spillage # Remove the radiator mounting bolts and brackets # Lift the radiator up and out of its lower mounting pads or grommets
Under the radiator overflow and washer fluid reservoirs.
yup.
how do put belt on 1990 ford bronco 5.8
No
The map sensor on a 1990 Ford 5.8 EFI Bronco is on the passenger side. It is located on the firewall.
The Bronco 2 was sold between 1984 and 1990. The Ford Bronco 2 was a compact SUV. It was smaller than a full-sized Bronco. It was succeeded by Ford Explorer.
yes
5000 lbs
A 1996 Ford Bronco came from the factory with a 50 / 50 mix of distilled water and GREEN color antifreeze ( meeting Ford specification ESE-M97B44-A ) in the engine cooling system * THAT includes the radiator
No , the 2.9 liter V6 engine in a 4X4 , 1990 Ford Bronco II is fuel injected
The engine choices in the full size Ford Bronco for 1990 were the 4.9 liter straight six cylinder , or the 5.0 liter V8 , or the 5.8 liter V8 engines
The Ford Bronco II was first manufactured and sold in 1984 and was manufactured for 6 years until 1990. It was designed as a smaller version of the full size Bronco.