There's two types, pressed in and rivited in, rivited in in generally for the 88-93 Chevy trucks, and pressed in is generally used for 95-98 Chevy trucks.
how do i change lower ball joint that is pressed in on a 99 tahoe
For the lower ball joint, remove the lower control arm and the ball joint seal. Press the ball joint from the control arm. Press the new ball joint into the lower control arm ensuring it is fully seated, install a new seal and the lower control arm.
The ball joint in a vehicle is used to pivot between the wheel and the suspension. There are usually and upper ball joint and a lower ball joint.
You will need to remove the tire and wheel from your Oldsmobile. Remove the retaining not on top of the ball joint. Pound the ball joint out. Reverse the process to install your new lower ball joint.
How to change the lower ball joint for Mitsubishi diamante 1994
how to remove lower ball joint on 2003 gmc savana van
You can not just change the ball joint , you have to replace the whole lower control arm with ball joint.
Retainer Clip
The 2001 Honda Accord lower ball joint torque specification is 90 pounds. The lower ball joint should be torqued in 45 pound intervals.
replace lower ball joint on ford ranger 2001
On a 1996 Ford Explorer : There are ( 2 ) lower ball joints on the front suspension . Each lower control arm , drivers side and passenger side has ( 1 ) ball joint
Get a big hammer and beat the lower ball joint out from the top of the lower control arm then look at the new ball joint make sure they match before you press them in.