Go here: http://www.ibmwr.org/ktech.shtml http://www.ibmwr.org/ktech/trip-odometer.shtml http://www.ibmwr.org/ktech/speedo-moisture.shtml http://www.ibmwr.org/ktech/tach-fix.shtml They were made by motometer and are prone to many different problems from fogging, trip meter breaks, backing warps in direct sun light (south western United states), connectors corrode, etc. The plastic backing can be replaced with tin to prevent warping. The bike will run correctly with out it being hooked up. -Mrbios '92 k75s
The gauges on the dash is the instrument cluster.
To get a 2003 F-150 Truck to start after replacing the instrument cluster the cluster will have to be re-programmed. A dealer or possibly a locksmith can reprogram an instrument cluster.
The instrument cluster is what houses the speedometer, and the gauges.
Remove instrument cluster in a 2003 olds aurora
Begin by removing the instrument panel cover. The instrument cluster will be held in place with for retaining screws. Remove the retaining screws and the instrument cluster will come out.
Disconnect negative battery cableTilt the steering wheel to its lowest position and remove the instrument cluster bezelRemove the instrument cluster retaining screwsPull the instrument cluster out,unplug the electrical connectors from the backside and the shift indicator from the bottom (automatic trans models) then remove the cluster from the instrument panel
Removing the instrument cluster on a Peugeot 206 is simple. You start with removing the steering wheel and then take out the dash board and then take out the instrument cluster.
Why is your 97 cadillac deville instrument cluster not working?
No, they will not interchange.
It is controlled by the airbag computer and the instrument cluster.It is controlled by the airbag computer and the instrument cluster.
An instrument cluster is what displays basic information in your car. Information like the speedometer, fuel level, care temperatures... etc. Cars nowadays are mostly made with a digital instrument cluster.
Remove the dash and remove the instrument cluster, the lights are in the back of the cluster.
A 1989 instrument cluster will not work in a 1993 Nissan 240 SX. You will need a 1990 to 1994Êinstrument cluster.
Replace resistors on Instrument cluster circuit board. $1.00 @ Radioshack and about an hour of your time...
remove the trim panel around the instrument cluster then remove cluster. On the back of instrument cluster are the bulbs just turn them half a turn and they come right out.
yes you can.
Its in the Cluster.
Usually, 'cluster', refers to the instrument/gauge cluster or instrument/gauge panel that the driver looks at, containing the speedometer, fuel gauge, etc.
* Disable the airbag system * Remove the instrument cluster bezel * Remove the retaining screws and pull the cluster forward * Unplug the electrical connectors and remove the cluster from the car
well i bought new lights for my instrument cluster thinking it would fix the problem but there still dim
To remove the instrument cluster on a 97 Malibu, first remove the screw at the bottom right of the radio's molding. Then remove the molding and the screws under the steering wheel. Remove the entire molding surrounding the cluster and the four screws to remove the entire instrument cluster.
Usually in the instrument cluster.
The warning chime is on the instrument cluster. It needs to be disassembled to get to, and it cannot be disabled because it is tied in to the instrument cluster.
The 91 Vandura G2500 Instrument Panel Cluster Relay is located on the dashboard.
I'm not sure if the following fuses are for the dash lights - the owner's manual lists them for " instrument cluster " location # 11 - 7.5 amp fuse for instrument cluster location # 15 - 7.5 amp fuse for instrument cluster location # 33 - 15 amp fuse instrument cluster/headlamps/DRL module