On the left side you have to remove the auxiliary battery control panel face plate to access the three bulb system of taillight, brakelight, and turn signal.
Remove the taillight assembly to gain access to the bulbs
2002-2006, the starter battery is under the hood on the driver side. The auxiliary battery (if equipped) is under the passenger seat. 2007-2010 the starter battery is under the driver side floor board. Pull the floor mats up and remove a panel to access. The auxiliary batter will be under the hood on the driver side.
2002-2006, the starter battery is under the hood on the driver side. The auxiliary battery (if equipped) is under the passenger seat. 2007-2010 the starter battery is under the driver side floor board. Pull the floor mats up and remove a panel to access. The auxiliary batter will be under the hood on the driver side.
how do you access zx14 battery
* Remove the rear inside trunk finishing panel to access the taillight housing mounting nuts * Free the grommet for the taillight electrical harness and the three taillight housing nuts then pull off the taillight housing * Rotate the bulb socket counterclockwise and pull it out of the taillight housing * To remove the bulb from the socket pull it straight out.To install a new bulb in the socket push it straight into the socket until it stops
Taillight bulb replacment/Taillight housing replacement * Remove the rear inside trunk finishing panel to access the taillight housing mounting nuts * Free the grommet for the taillight electrical harness and the three taillight housing nuts then pull off the taillight housing * Rotate the bulb socket counterclockwise and pull it out of the taillight housing * To remove the bulb from the socket pull it straight out.To install a new bulb in the socket push it straight into the socket until it stops
You just have to pull back the trim in the trunk to access the fasteners for the taillight assembly. Once you remove the taillight assembly just replace the bulb.
* Remove the rear inside trunk finishing panel to access the taillight housing mounting nuts * Free the grommet for the taillight electrical harness and the three taillight housing nuts then pull off the taillight housing * Rotate the bulb socket counterclockwise and pull it out of the taillight housing * To remove the bulb from the socket pull it straight out.To install a new bulb in the socket push it straight into the socket until it stops
* Remove the rear inside trunk finishing panel to access the taillight housing mounting nuts * Free the grommet for the taillight electrical harness and the three taillight housing nuts then pull off the taillight housing * Rotate the bulb socket counterclockwise and pull it out of the taillight housing * To remove the bulb from the socket pull it straight out.To install a new bulb in the socket push it straight into the socket until it stops
* Remove the rear inside trunk finishing panel to access the taillight housing mounting nuts * Free the grommet for the taillight electrical harness and the three taillight housing nuts then pull off the taillight housing * Rotate the bulb socket counterclockwise and pull it out of the taillight housing * To remove the bulb from the socket pull it straight out.To install a new bulb in the socket push it straight into the socket until it stops
You just have to pull back the trim in the trunk to access the fasteners for the taillight assembly.
The access panel is located on the floor in between driver and front passenger seats next to the emergency brake. The seats are easily removed and some of the carpet needs to be pulled back.