Yes. Brake caliper compression tool. Ratcheting calipers
the piston has 2 slot that you have to place a special tool and rotate clockwise and this will take it in
the caliper needs a special tool. the piston does not push straight in. the spring needs to be released at the rear of the caliper. then using the special tool the piston twists back in to place
if it is the caliper at the rear u need the special tool to turn the piston clockwise to push in and counterclockwise to pull out
You will need special brake caliper tool such as a C-clamp to push back the piston on the caliper of a 2002 Mitsubishi Lancer.
Remove caliper mounting bolts Slide caliper off rotor Use a "C" clamp to fully retract piston into caliper body If parking brake is used on this caliper piston is threaded and a special tool (not expensive) is required to thread piston into caliper body
If it is the front brake use a "C" clamp to retract piston If it is the rear and the parking brake is used by this caliper piston is threaded and a special tool (not expensive) available at Sears or auto parts to "screw" piston into caliper body
The teves caliper is a single piston disc brake caliper and the akebono caliper is a dual piston disc brake caliper. The teves caliper is a single piston disc brake caliper and the akebono caliper is a dual piston disc brake caliper.
If the piston has come out, the caliper will need replaced.
it screws back in....special tool helpful
The rear brakes you need a 3/8 standard wrench to open two bolts retaining the caliper. The piston caliper requires a special tool to "wind " it or screw it back in order to install the new brake pads. DO NOT PRESS THE CALIPER PISTON BACK. You have to "screw" or rotate it. The rear brakes you need a 3/8 standard wrench to open two bolts retaining the caliper. The piston caliper requires a special tool to "wind " it or screw it back in order to install the new brake pads. DO NOT PRESS THE CALIPER PISTON BACK. You have to "screw" or rotate it.
It requires a special tool.It requires a special tool.
Use a "c" clamp (front) to slide piston into caliper body Rear piston is threaded and requires a special tool to screw piston into caliper body Tool not expensive and available at Sears or auto parts