If you mean the freeze plugs at the back of the block that are covered up by the bell housing, then you would have to either drop the trans or pull the engine whichever seems easier.
It's usually easier to drop the trans.
how do you replace the freeze plugs between the transmision and motor on a 1997 f150 5.4
It is your choice. You can either remove the transmission and leave the engine alone. or pull the engine and leave the transmission alone. If your SMART you will replace all the freeze plugs in the engine.
When the engine is removed from the engine compartment, and detached from the transmission, there are freeze plugs on the back side of the engine. You may be able to just disconnect the engine from the transmission, and loosen the motor mounts and lift the engine partially away to replace the freeze plugs.
It depends on where the freeze plug is. Some Are on the back of the motor requiring the transmission to be removed. Once you can see it you can take it out with a screwdriver and it is easier to replace with a rubber one rather than a metal one.
No you can not put any Oldsmobile motor into a 1985 Cutlass Supreme. Each car has a motor that was designed specifically for that vehicle. So if you need to replace the motor in a 1985 Cutlass Supreme, you need to find the specific motor for that vehicle.
Get under the vehicle and look to see if you can see the leaking freeze plug. If you can't then it may be between the motor and transmission. If so, you will have to remove the transmission to replace it.
Remove the wiper arm from your 1999 Oldsmobile Cutlass wiper motor. Remove the wiper motor wiring harness. Remove the wiper motor retaining bolts. Reverse the process to install the new wiper motor.
Near where the motor and transmission connect
you can leave the transmission in or you can leave in the transmission
NO THEY ARE NOT.
Yes there are 2
Yes