0
Add your answer:
Earn +20 pts
Where should the timing marks be relevant to the timing chain on z24?
The timing marks should be dot to dot.
How do you set the timing on a 1988 Chevrolet s10 and is it hard once you get a new chain?
Dot to Dot
1996 cavalier timing marks for replacing timing chain?
The small hole in the larger gear is the timing mark. The smaller gear should have a dot marking the tooth two left of the shaft key.align this dot to dot the hole pointing to the dot
Where do the timing marks need to be for a timing chain on a Chevy 350?
The crank gear dot should be at 12 o'clock stright up when #1 pistion is all the way to the top of the cylinder. The cam gear dot should be at 6 o'clock stright over top of the crank gear dot. Then put it back together.
On a 95 k 1500 5.7 are the timing marks dot to dot?
If you mean timing chain and gears...Yes...they still install dot to dot. With the cam gear dot at 6 o'clock position and crank gear at 12 the engine is ready to fire on #6 cylinder. To bring it to #1 after installing the timing chain and gears, rotate the crank until they are both at the 12 o'clock position.
How are the dots set on the gears on a 96 Chevy Tahoetiming gears 5.7 engine size?
The dot on the bottom gear goes straight up and the dot on the top gear points straight down when the timing chain and gears are installed correctly.
Are the timing chain gears on a 1990 GMC 3500 454 supposed to be dot to dot?
YES Stright over top of each other.
What should the timing be set at after you have replaced the timing chain on a 1994 Chevy s10 2.2 liter engine?
Put the crank shaft at TDC. There is a dot on one of the crank gear teeth. It should be pointing toward the cam gear. Put the cam gear on without the chain. Turn the cam until the hole in the cam gear is pointing toward the crank. In other words, the hole in the cam gear and the dot on the crank gear should be in line. Then simply remove cam gear and apply the chain. The computer does the fine timing. Nothing to adjust.
Where are the timing dots supossed to be on a Chevy 350?
When the engine is at #1 TDC, the dot on the crankshaft sprocket is at 12 o'clock, and the dot on the cam sprocket is at 6 o'clock.
How do you Set Timing Chain on 96 Oldsmobile Achevia 2.4L?
dowel holes in head with holes in gears, dot on crank gear straight up with dot on block
Where are the timing marks on the camshaft and crankshaft of a 96 Cavalier?
The timing marks are dots on the ends of the camshaft and crankshaft. They are on the sprocket ends where the timing belt or chain connects. The dots should be pointing towards each other for proper setting. The cam dot should be pointing down and the crankshaft dot pointing up. The dots or marks can only be viewed when the timing chain cover is removed. hope this helps...
How do you set sprockets on timing chain on a 97chevy 350 vortec?
Dot goes to dot. Bottom gear dot stright up at 12:00 oclock. Top gear dot stright down at 6:00 oclock.
