Yes it does, Just follow the top radiator hose to were it clamps onto the engine. That will be the thermostat housing, it has 2 bolts holding it to the engine, remove that housing and the thermostat will be under there.
You did not mention the engine size. Regardless, it is in the thermostat housing on the intake manifold.
It is located on the intake manifold near the thermostat housing.
The thermostat in the 2002 Blazer will most likely be in the top radiator hose engine inlet, depending on the engine in the vehicle. The top hose is removed then the inlet unbolted to reach the thermostat.
Follow the upper radiator hose back to the engine, it is connected to the thermostat housing on the engine. The thermostat is located under the thermostat housing.
The valve is at the front of the engine just behind the A/C Compressor. Its just above the thermostat. Be careful as for some unknown reason GM has designed this valve without polarity. It can be installed upside down which will yield less than impressive results. Where is the EGR valve located on a 1995 Chevrolet Blazer with a vortec engine?
follow the upper radiator hose to the thermostat housing on engine. Thermostat is located under the thermostat housing.
The thermostat is located in the housing that the top radiator hose connects to, the bolts holding it on to the engine are metric.
If you will follow the top radiator hose to the engine, you will see were it clamps to a housing. It is under that housing.
The coolant temperature sensor, on a 2005 Chevrolet trailblazer 4.2 liter engine, is located just above the thermostat housing. The thermostat housing is located in the front of the engine.
Follow the upper radiator hose to the engine, the thermostat is under the housing the hose connects to.
The power of the engine of the Chevrolet blazer 8cyl 1968 is 435 hp
The 1997 Chevrolet blazer actuator switch is located on the firewall in the engine compartment. The switch is on the passenger side of the engine compartment.