0
Does a dodge neon require a special size socket to remove spark plugs?
Wiki User
∙ 12y ago
It requires a 5/8 inch spark plug socket and an extension.
It requires a 5/8 inch spark plug socket and an extension.
Wiki User
∙ 12y ago
Wiki User
∙ 12y agoIt requires a 5/8 inch spark plug socket and an extension.
Add your answer:
Earn +20 pts
Remove lighter socket from 2013 dodge durango console?
how to remove lighter socket from 2013 dodge durango console
What socket for 1998 dodge Dakota starter bolt remover?
The starter bolts on a 1998 Dodge Dakota require a 5/8 inch socket or wrench.
Where are the TRANSMISSION input and output speed sensors on a 2002 Dodge Intrepid?
They are on the driver's side of the transmission, and require a 1 inch deepwell socket to remove, and you may need some extensions to reach it.
What size socket do you need to remove the thermostat from a dodge grand caravan 2000?
That depends on the engine. I believe that the 2.4L needs a 10mm socket, the 3.0L uses a 12mm, and the 3.3L/3.8L use a 13mm socket to remove the housing bolts.
How do you remove spark plugs fromm 99 2 7 dodge intrepid there is a ledge in the cylinder even with the bolt of the spark plug no socket i have found will grab the plug is there a special tool?
A normal 5/8 spark plug socket should work just fine.
What size socket is needed to remove the rear hub bearing nut on a 2000 dodge stratus?
30mm
How do you remove timing gear on 94 dodge 2.5?
There is a special tool ( a puller ) to remove the crankshaft sprocket.There is a special tool ( a puller ) to remove the crankshaft sprocket.
How do you replace the crankshaft sensor on a 1994 Dodge Ram?
The crank sensor is located behind the passenger side head, in through the bell housing. It is held in place by two bolts that require a 5/16 Allen socket to remove.
What kind of wrench is needed to remove the front caliper bolts on a 2005 dodge stratus?
7mm hex socket
What is the axle bolt size of a fwd dodge stealth non turbo sohc?
It is a 33mm socket you will me to remove the nut
How do you remove spare tire on Dodge ram without tool?
If you don't have the tool a 13mm socket should work
What size socket to take off rear spindle nut on 2001 dodge 3500 truck?
It is a special 2 9/16 inch socket just for axle nuts.
