it shouldn't but it is a possibility
The valves can hit the tops of the pistons damaging or breaking either.
Yes. Valves can be damaged when the timing belt breaks.
No because unlike Hondas this machine doesn't has an interference design where the pistons could hit valves when timing belt breaks.
?If a timing belt or chain breaks while the engine is running the engine will be severely damaged and some of the valves will probably bend and damage the pistons. A timing best needs to be replaced BEFORE it reaches the end of its life and breaks. Car manuals make this clear.
It is an interference engine by design so if the timing belt breaks it will be seriously damaged. The valves will be bent and the engine will need repairs costing upwards of $1500
Yes valves can bend if the timing belt breaks.Yes valves can bend if the timing belt breaks.
the ZETEC engine used in the 1999 ZX2 is a non-interference engine. This means that the pistons will not contact the valves when the timing belt breaks. Because of this, the valves will not be bad if the timing belt breaks
Yes, the valves will most likely be damaged if the timing belt breaks. There is usually further damage associated with the timing belt breaking while the engine is in operation. Some additional damages could be, connecting rods, crankshaft, lifters, and cam damage.
No, it is interference. Valves can bend if the timing belt breaks.No, it is interference. Valves can bend if the timing belt breaks.
If the valves bent, then yes.
yes, valves can bend if the timing belt breaks.yes, valves can bend if the timing belt breaks.
This is an interference engine. If the timing belt snaps it will cause a loads of problems: bent valves, damaged pistons, damaged cam shaft. Replace the belt every 60,000 miles.