how do you remove the door panel on a 2001 dodge stratus?--2 door
No, tank has to be lowered.
remove door panel then remove screws behind mirror. remove door panel then remove screws behind mirror.
Try a local junk yard.
To remove the window regulator in your 2005 Dodge Stratus, you would need to remove the door panel, and then the water shield behind the door panel. Tape the window into the up position with tape, and then you can access all of the nuts and bolts to remove the window regulator. I have included a link below to an instuctional video that will show you how to do this on a 01-06 Dodge Stratus.
The interior fuse panel is just inside the driver door on the edge of the dash.
Check under the hood. There is a fuse and relay panel. There is also a fuse panel next to the driver's side door on the side of the dash.
Using a screw driver, remove all of the screws and the clips from the panel of the car. Pull the panel away gently, remove any wire connectors, and then pull the panel off the door.
To remove the door panel on your 01-06 Dodge Stratus you would first need to remove the door panel. Then there are two bolts that hold the mirror to the door. You will need an 8MM socket or wrench to remove these from the mirror. I have included an instructional video below that walks you through this entire process. Hope this helps. 1aauto.com
No
I have the same type of car a 06 dodge stratus sxt sedan and mine is located on the driver side by the door. you will need to remove the panel where your fuses are located and it is at the bottom right. hope this helps.
To replace the window switch in your 2004 Dodge Intrepid you need to remove the door panel. Once the door panel is removed there are two T-20 Torx screws that hold the switch to the door panel. I have included a step by step auto repair video below, that shows how to accomplish this.