Door panel remove from navigator?
Door panel removal is explained at a site that details the mirror removal which includes the removal of the driver door panel, I think this will help - it is a pdf file. http://www.muthco.com/techsupport/pdfs/21000140.pdf
Door Panels Removal & Installation 1. Remove the sail panel (Front Doors Only). (Triangle looking shape near the side view mirror) 2. Remove the door panel by carefully lifting the panel upward to release the retaining clips. 3. Remove the electrical plugs that control the windows, exc. The installation is the reverse of the removal.
Door Panels Removal & Installation 1. Remove the sail panel (Front Doors Only). 2. Remove the door panel by carefully lifting the panel upward to release the retaining clips. 3. Remove the electrical plugs that control the windows, exc. 4. Replace speakers The installation is the reverse of the removal.
What you need to do is take off the door panel. Be careful not to break the door latches because they hook inside the door frame so you have to lift up on the panel in order to remove it. Once you remove the panel look insde the door to the right you will see the actuator. There are three screw located on the outside of the door frame which holds the latch in place…
There is 2 covers on the handle above the main handle with all of your switches. Remove them and the 2 bolts and slide the plastic piece through the door handle slide the panel up as you are pulling on the handle to let it slide through the door panel. Then disconnect the wires for the switches and mirror.
pop off the covers on each side of the door handle, under the covers are 2 screws. Remove the screws and push the door handle cover through the panel. Once you have done that, lift up on the panel and catch it from the top of the panel. It should come off freely, after that just unhook the power window relay (if you have power windows) and your finished.
There is a screw in side the door handle remove that then remove the clip that holds the door handle on then from there remove the 2 screws on the outer side of the door. then find and remove the screw closest to the dash then starting at the bottom of the door panel carefully pull out on the panel until it pops free. then lift up on the door panel and its out. hope…
To remove door panel you will need a door panel tool or a paint scrapper like tool. You will have to remove some screws around door handle and so. Then you will need to remove door panel by prying door loss around the edges of the door panel. When done with the repairs or anything your doing after removing door panel. Then the door push-pins are supposed to be on the door panel. When ready…
pop out small panel behind door pull remove two torx screws , remove two pop out connectors on outer edge of door panel near door latch ,grab bottom of door panel and pull it towards you this will release panel ,disconnect wires as needed if you want to remove entire panel from door, lift up on panel to remove it from edge of window track