Once you remove the trim, it will be impossible to put back on because they can only be used 1 time each. They cost about 75 dollars a piece to replace, and to take them off, you will have to have to take the door panel off.-Shocker
To remove the windshield trim on a 1968 Chevy Impala you will need a trim removal tool that has slides which can release the locking clips.
Go to chevroletforum.com then clik on Impala and select Sticky: How to: Dash front removal and...........
With the help of a Trim Tool, carefully remove the Center Trim Panel from around the Radio. Remove the 4 screws. Pull out Unit. Disconnect Electrical Plug & Antenna. Installation is reverse.....
It is not necessary to remove the dash. Only necessary to remove enough of the trim pieces to get the radio out. If you look carefully you will see what needs to be removed.
how to remove front bumper 2002 Impala
First you should move the seat completely forward. Then, remove the side trim, the bolt that holds the seat belt in place, and the rear bolts. Finally, lift seat, disconnect the wires and remove the seat from vehicle.
inside the door latch, remove the trim to access à l'intérieur du locket de porte, il faut retirer le trim de porte pour y avoir accès
On newer models, you have to move the seat all the way forward, remove side trim cover, remove seat belt anchor bolt, remove seat rails retaining bolts, tilt seat upward, disconnect wires, remove seat...
How do i remove a heater core to a 1974 chevy impala?
Move seat fully forward, remove side trim, remove seat belt retaining bolt, remove seat tracks rear bolts, flip seat upwards, disconnect wiring, remove seat.....
Impala HQ .com
how d you remove the blender door motor on a 2007 impala