It is not behind it, GM removed 1 drain plug and installed a knock sensor in its place.
Just remove sensor. If your lucky it might come out without brakeing. It is not behind it, GM removed 1 drain plug and installed a knock sensor in its place.
Just remove sensor. If your lucky it might come out without brakeing.
Just behind the front grill (1 screw on the BOTTOM should also be opened)
You have a faulty temp sensor. Change the sensor. Make sure car is not overheating. WRONG, IT WAS IGN MODULE AND CRANK SENSOR. BUT THANKS ANYWAY, I FOUND IT AND FIXED IT MYSELF.TWO AND A HALF WEEKS AGO, I FOR GOT ABOUT ASKING YOU GUYS, AS USUAL,I DID IT AGAIN,BUT THANKS AGAIN VICKIEJT
The crankshaft position sensor must be behind the timing belt cover next to the crankshaft and behind the crankshaft pulley. The camshaft position sensor is again under the timing belt cover next to the camshaft and behind and the camshaft pulley. Is it the same place in 2000 Camry 4Cyl? Do you have pictures of the location? Hard or easy to replace, and what tools do I need? Thanks alot
both are under forward exhaust manifold.
where is the abs wheel sensor on a 2004 chev calavier thanks
You need to have the car checked for trouble codes. There are about 10 pages of things that could turn those lights on.
My bad! it's the same as the EX, behind the ashtray!
the temp sensor is right behind the distributor
It's behind one of the camshaft pulleys. Why would a CRANKSHAFT position sensor be behind a CAMSHAFT pulley ??
it is on the windshield behind the mirror..there is a black plastic cover behind the inside mirror, sensor is inside that cover..
Tutorial in the link, but if you don't trust link that anyone just post's, which is a smart thing to do, the sensor is behind the front drivers side wheel, looking in, it'll be behind and to the left of the strut. There is oddly enough, nothing in the way of accessing it, an oddity on this car. http://tutorials.newcougar.org/HowToEnd1-2BangShift.pdf
The sensor behind the oil filter for a 1998 Neon is a crankshaft position sensor. Unplug the wiring and remove the hold down bolt to replace it.