Idle Air Control Valve.
PO 1507 is Idle Air Control System Underspeed
there is an idle control on these cars, could also be a problem with your intake, and idle. that's what was wrong with my 2000 focus. i lowered the idle, and changed the air filter.
ford focus stalling at idle but not cutting off the check engine light is on please help so i dont get rip off thanks
most 2000 model year focus have a fuel delivery module recall.
A bad IAC (Idle air control valve) or a vacuum leak or both.
Check your vacuum hose.
throttle body or idle air control value
i have a 2000 dodge work van 318 engine when i start in the morning it stalls several times until it warms up then ok
AnswerBehind and Below the Carburetor there is a Set Screw that you turn in which raises the Throttle cable Bracket. Similar to this imagehttp://www.danhardison.com/focus/sc/DSC03878.JPG
There is no idle screw. The idle air control valve controls the idle and can be set on different settings. You should consult a Ford dealer or mechanic for proper settings.
Well FORD is a pos, Fixed Or Repaired Dailiy Found On Road Dead
the idle jet in the carb is blocked and needs to be cleaned out and reset
Remove, clean or replace the IAC (Idle Air Control) valve.
Most likely the ignition module.
Your idle air controle valve.
Either you need a tune-up, or your injectors are dirty.
i don't know maybe you can check on the ford website
Because it's a Ford.
Idle Air control valve
p1506 is an IAC (Idle Air Control) error code that comes on when your on-board computer senses an undesired Idle RPM.
your electric radiator fan might not be working,check fan fuses
my local ford dealer just quoted me £13.22 plus vat,so about £16.00 to fit an x reg 2000 1.8 petrol.mine is well split and causing a rough idle...
My best guess is that the Idle Air Control (IAC) valve may need to be replaced.