on the drivers side underneath of your Jeep u will find a hose with a bleed fitting on the end by by pushing in the clutch build pressure and have a friend loosen the bleed valve to release pressure until u do not get air out when first opening the valve be sure to keep the reservior full during this process and top off after finishing if this doesnt work u most likely have a bad slave cylinder.
Where is the clutch bleed valve located
I HAD THE SAME PROBLEM WITH MY 92 WRANGLER.. GO TO AUTOZONE.COM AND CLICK ON SERVICE MANUALS, THEY WILL EXPLAIN HOW TO BLEED THE SLAVE CYLINDER.. AND IT WORKS.. DON DRC@EPIX.NET
On the opposite side of the trans from where the clutch line enters, a fitting with a bleed valve on the end. You can get a great view if you remove the access panel around the shifter, you will be able to see them both from there, loosen the end to bleed.
Yes.
Yes
No
Where is the fuel pump RELAY on a 1992 Jeep Wrangler
Yes. 92 and 93 are the same model years
No that will not work, 05 is a TJ and 92 is a YJ
It is in the fuek tank.
how do you bleed a cluch on a 92 Saturn sl
There is not any adjustment on this clutch. Al you have to do is bleed the system.
1987 thru 1995