pull off the plastic trim from around the back window starting at the top. after that's off take the inside handle off by removing the 2 screws. then slide the whole bottom panel up about 1" and it will come off. that's how it is for my 2000 e350xlt.
To remove the door panels in a 1987 Ford Ranger, simply crank the cover on the door to pry it open. Then remove the head screws inside and take off the other three screws.
If your talking about the door speakers then you will have to remove the door panels to get to the speakers.
Removing the door panels on a 2000 Ford Ranger is easy. All you have to do is snap out the old panels by unscrewing the bolts and screwing in the new ones.
That is what I want to know. wikianswers is not doing its job
My 1997 e350 has 6x8
you have to remove the inside panels to get at the latch to open
For removing the door side panels, See "Related Questions" below for specifics on the front & side doors.
Go to Napa and buy a Repair Manual.
Door Panels Removal & Installation 1. Remove the sail panel. 2. Remove the door panel by carefully lifting the panel upward to release the retaining clips. 3. Remove the electrical plugs that control the windows, exc. 4. The installation is the reverse of the removal.
Door Panels Removal & Installation Remove the door panel by carefully lifting the panel upward to release the retaining clips. Remove the electrical plugs that control the windows, exc. The installation is the reverse of the removal.
If no obvious screws or cover plugs, it just pulls off. Most door panels do. May have to remove inside handle first if there is one.
Door Panels Removal & Installation 1. Remove the sail panel (Front Doors Only). 2. Remove the door panel by carefully lifting the panel upward to release the retaining clips. 3. Remove the electrical plugs that control the windows, exc.The installation is the reverse of the removal.