Google tailor wiring connections, then all you need to do is identify the wires that do the lights,
left signal, right signal, brake, lights and reverse. then the last wire is ground
on the car
the diagnostic socket on peugeot 307 is under the ash tray( behind the gear lever). Lift up and remove the rubber pad and there it is. Dave
circuit diagram is the most important in electric stove plugged into the socket
You will need a 35 mm socket.
Usually, hammering a 13mm socket on works Brilliant-I used a 12mm socket on my Peugeot 807 and it came undone immediately. I had spent best part of a day trying to drill it out and I was about to pay Peugeot £120 to do it. Many thanks jazzers 12mm socket on an 807? Yeah,,,, of course you did, They were bigger than that on the Mk 1 Mini.
Fuse #7, down right.;)
See the link below ; Wikipedia has a diagram of a ball and socket joint .
Its in the fuse box under the steering wheel looks to be a standard odbII
You need a peugeot kit, that includes a new ECU. This then needs coding into the vehicles BSI, which can only be done by a dealer.
It is bulb type as T5 socket.
The gearbox oil fill plug can be located, in your Peugeot 306 2.0, on the top of the gearbox nears the back. The plug can be removed with a three-quarter inch socket
35mm on the front, some people use a 6 sided 36mm without problems