Find the sine of the angle from the toe required per side/wheel (inches) divided by the diameter of the wheel rim (inches) For example 1/16th inch total "toe-in" which is 1/32" per side = 0.03125" Assuming a rim diameter of 15" Toe angle per side is sine of 0.003125/15 = 0.002083 equivalent to 0.119366 degrees which is also 7.16 minutes. Total toe-in is double the per side toe-in, in this case 14.32 minutes. Ray

🤓

🤯

🤔

Q: How can you convert front end alignment data from inches to degrees i need data for a 65 el camino?

Write your answer...

3.50 degrees to inches

An inch is a measure of length, while a degree is a measure of angle, so it is impossible to convert inches to degrees.

For the front wheels the caster setting is 3.15 degrees and the camber is 0 degrees with a toe in of 0 inches. For the rear it is -0.5 degrees of camber and 0.08 inches toe in.

Caster 2 to 4 degrees Camber -1 to 1 degrees Toe 0 to .2 inches

The castor settingÊis positive 4.7 degrees. The camber setting is positive 0.25 degrees. The toe in is 0.10 inches.

The length of a 1967 El Camino is approx 194 inches The width is approx 72 inches

First convert feet-and-inches to inches and then multiply by 2.54First convert feet-and-inches to inches and then multiply by 2.54First convert feet-and-inches to inches and then multiply by 2.54First convert feet-and-inches to inches and then multiply by 2.54

To convert inches to centimeters, multiply by 2.54. To convert from centimeters to inches, divide by the same factor.To convert inches to centimeters, multiply by 2.54. To convert from centimeters to inches, divide by the same factor.To convert inches to centimeters, multiply by 2.54. To convert from centimeters to inches, divide by the same factor.To convert inches to centimeters, multiply by 2.54. To convert from centimeters to inches, divide by the same factor.

187 inches

23C is a temperature (23 degrees Celsius). You cannot convert a temperature into a distance.

how do you convert 1.96 into inches

* To convert inches to millimeters, multiply by 25.4 * To convert inches to centimeters, multiply by 2.54 * To convert inches to meters, multiply by 0.0254

convert 4.2 cm to inches

You can't convert that. You can convert inches to feet, or cubic inches to cubic feet.

You cannot convert square inches to inches. Square inches are units used to measure area and inches are units of length. You cannot convert one to the other.

You cannot convert cubic inches to inches. Cubic inches are units of volume and inches are units of length.

You cannot convert cubed inches to inches. Cubic inches are units of volume and inches are units of length.

To convert cm to inches, divide by 2.54. After that you can convert inches to feet and inches.

convert 5 feet 6 inches into inches

To convert centimeters to inches, divide centimeters by 2.54 . To convert inches to centimeters, multiply inches by 2.54 .

To convert meters to inches use: 1 meter = 39.3700787 inches To convert inches to meters use: 1 inch = 0.0254 meters

To convert inches to mm, multiply inches by 25.4. To convert mm to inches, divide mm by 25.4.Easy to do. There are about 25.4 mm in one inch. Therefore, use this formula to convert inches to millimeters: inches x 25.4 = mm

Divide centimeters by 2.54 to convert to inches. Then convert inches to feet and inches.

You cannot convert inches to cubic meters.

One inch = 25.4 mm. To convert from inches to mm, multiply by that number. To convert from hundredths of an inch to mm, convert to inches first. Or multiply the number of hundredth-inches by 0.254.