Usually when you put your seat belt on it'll turn off the reminder.
The following steps must occur within the first 60 seconds of the ignition switch being turned to the ON or START position. The manufacturer does not recommend deactivating the Enhanced Warning System (BeltAlert)
1. Turn the ignition switch to the OFF position, and fasten the driver's seat belt.
2. Start the engine, and wait for the Seat Belt Warning Light to turn off.
3. Within 60 seconds of starting the vehicle, unbuckle and re-buckle the driver's seat belt at least three times, ending with the seat belt buckled, within 10 seconds.
4. Turn off the engine. A single chime will sound to signify that you have successfully completed the programming.
The Enhanced Warning System (BeltAlert) can be recactivated by repeating this procedure.
The 2006 Jeep Grand-Cherokee has 12 valves.
The 2006 Jeep Grand-Cherokee has a V6 engine.
The 2006 Jeep Grand-Cherokee is a gas-powered vehicle.
The 2006 Jeep Grand-Cherokee has a drag coefficient of .41 Cd.
The 2006 Jeep Grand-Cherokee is 15 ft. 6.7 in. (186.7 in.) long.
The 2006 Jeep Grand-Cherokee has a 27.1 degrees angle of departure.
The height of the 2006 Jeep Grand-Cherokee is 5 ft. 10.3 in. (70.3 in.).
The curb weight of the 2006 Jeep Grand-Cherokee is 3789 lbs..
The 2006 Jeep Grand-Cherokee has a 34.1 degrees angle of approach.
The 2006 Jeep Grand-Cherokee runs on regular unleaded.
The maximum payload of the 2006 Jeep Grand-Cherokee is 1550 lbs..
The 2006 Jeep Grand-Cherokee has single overhead cam (SOHC).