0
What else can I help you with?
Can you use transformer with your 110 aircon?
A transformer can be used to change the voltage to an appliance. The voltage rating of the transformer should be right for the voltages used, and the current rating of the transformer should not be less than the current drawn by the equipment.
Why transformer rating is not given in kw?
Transformer rating is based on the maximum temperature a transformer can run at. This temperature is dictated by the amount of current flowing through the transformer windings. This is why transformers are rated in KVA (voltage * current), not kW - it doesn't matter what the phase relationship is between voltage and current, just the magnitude of the current.
What is a full load current in single phase transformer?
It is the rated maximum current that can be taken from the transformer. This is equal to the VA rating divided by the output voltage. So a 6 kVA 240 v transformer would have a maximum current rating of 6000/240 or 25 amps.
Will a 4.74 amp transformer fry a computer designed for a 3.42 amp transformer?
No because the current rating of the transformer is a maximum allowable current. If the computer still takes 3.42 amps it will be OK provided the new transformer supplies the correct voltage.
How do you calculate MVA rating of power transformer?
The product of the secondary rated current and the secondary rated voltage will give you the rated V.A of the transformer.
How many 200 amp panels can you tap off 250 kva transformer?
You can tap off approximately 833 200 amp panels from a 250 kVA transformer. This calculation is based on dividing the kVA rating of the transformer by the current rating of the panel.
What is mean KVA Rating of transformer?
copper loss is directly propostional to I (AMPERE) and iron loss directly propostional to V (VOLTAGE) then total losses is equal to volt ampere hence the rating of transformer in KVA. SULTAN
How do you calculate current capacity of transformer?
The secondary winding's current rating is the rated apparent power of the transformer (expressed in volt amperes) divided by its voltage rating (expressed in volts). This applies to both step down, and step up, transformers.
Can you use a step up transformer 110220 with output of 16 kva?
Yes, but your input current is going to be high at 133 amps. The output of the transformer is not going to be 16 KVA, that is the rating of the transformer.
What is the secondary rating of a 50KVA transformer?
The secondary current is determined by the load, not by the transformer. For example, if the secondary voltage is 50 V and the load is 100 ohms, then the secondary current will be 0.5 A. If the load is 25 ohms, then the secondary current will be 2 A. It is important that a continuous secondary current doesn't exceed the rated secondary current of the transformer.
How are the amperes for transformer calculated?
Find the wire from the secondary of the transformer. If it's a step-down transformer the thicker wire is the secondary. Measure its diameter in inches and calculate its cross-section area in square inches. The current rating for transformer wire is 1000 amps per square inch, or 1.55 amps per square mm.
What is kva rating of single phase transformer?
This is the rated output of the transformer, obtained by multiplying the rated secondary voltage by the rated secondary current. And it's 'kV.A', not 'kva'.
