How can you remove front seat in 1999 Chevy Blazer S-10 4x4?

Answer 1

You're going to need 4 tools to

• A fillips screwdriver
• Hammer chisel or flat peace of steel
• Automotive Star Bit T50
• ½ sock or closed Wrench

First remove the nut cover from the floor mount located under the seat, they cover the nut and have a nut lock in It, used the chisel and hammer, remember not to hit the thread on the bolt. (There are three to remove) Once the covers are removed use the ½ tools to take the nut off. (3 of 4 secured points for the seat) The 4 one is a star bit bolt it located in the back. Take the dust cover off use the Philips to remove the cover. Once it's off use the Star bit T50 to remove the bolt it will very tight once it removed. UN plug the seat belt warring sensor underneath the seat and then remove the seat. To install the new seat make sure that the rails are in the same position if there not it is very hard to move then.