Apply a thin coat of oil to the gasket of the new filter. Tighten the filter 3/4 turn after it makes contact with the mounting surface. NO MORE NO LESS!
4 quarts with filter change
I have a '93 sl1. It usually takes 4 quarts with the filter
To remove the oil filter on a 2004 Saturn vue 2.2l. when you open the hood right in between the radiator and motor on the right side. You will see a big black plastic cap with a 1-1/4" socket on top. it has a internal oil filter. just twist the cap off and replace the oil filter and tighten cap back on.
You must hand tighten the filter.
To change the oil filter first drain the old oil. Then use an oil filter wrench, preferably the cup type you put on a ratchet, and unscrew the filter. The filter is located right next to the oil pan, it's pretty obvious what it is. Then take the new filter, rub some oil on the gasket, and hand tighten it. DO NOT tighten with wrench, only hand tighten it! Then fill the car with new oil. All done.
Saturn recommends changing oil filter every 6000 to 12000 miles. Most mechanics recommend changing the oil filter with every oil change.
on my 94 it was near the oil filter and it was a canister type like your oil filter
Buy the correct filter for your car and it will fit. If you mean how to install it then oil the gasket and tighten the filter 3/4 turn after it makes contact with the mounting surface. Do not over-tighten.
The oil filter on a 2008 Saturn Astra is located in front of the engine. The oil filter can be found on the underside of the exhaust manifold towards the passenger side of the vehicle.
Where is the transmission filter location on a 2003 Saturn Ion
It has a cartridge filter mounted on the engine block that you simply unscrew counterclockwise. Install the new filter by applying a thin coat of oil to the gasket and then tighten it three-quarter turn after it makes contact with the mounting surface.
Tighten it 3/4 turn after it makes contact with the mounting surface. Do not tighten it any more or you may have trouble removing it. Be sure and apply a thin coat of oil to the oil filter gasket before you install it.