0
How do I calculate the drop length of my tablecloth?
FloridaTableClothfb3...
For a Rectangle table: Measure the width and length of your table, then subtract those numbers from the width and length of the tablecloth and then divide by 2. For a Round table: Measure your table at its widest, then subtract from the tablecloth diameter and then divide by 2. Example: Your table is a 60" round. The tablecloth is a 90" round. 90"-60"=30" 30" divided by 2=15" 15" the drop around the table!
Wiki User
∙ 7y ago
Add your answer:
Earn +20 pts
What if the drop length on my tablecloth is not the same on each side of my table?
A drop is seldom consistent around the entire table with a standard tablecloth, because there are so many different size tables and only a few standard tablecloth sizes. This is not a problem so long as the cloth does not look skimpy or lopsided...it should work just fine!
What is the length of a tablecloth?
50 feet
What measurements do I take to buy the correct sized table linens?
To find the correct size table linens you have to start with shape: square, oval, oblong, or round. Then you must measure the table and account for drop on the sides. Using this formula should give you an estimated size: Length of table + (desired dropx2)=tablecloth length. Width of table + (desired drop x2 ) = tablecloth width.
What is the appropriate drop length for a tablecloth?
The appropriate drop depends on the occasion and the type of atmosphere you want to create. For a more formal look, create a luxurious feel with a 12" - 18" drop. For most settings an 8"-10" drop is fine. For the most casual setting, a 6" drop may also work.
Will a tablecloth that is 155 cm long cover a table that is 1.6 m long?
No. A tablecloth that is 155cm is 1.55m in length. So the tablecloth is slightly shorter than the table.
What size tablecloth for a 72 round table?
If the table height is 29 inches then 132 inches tablecloth perfect fit and it will give drop up to the ground.
What size tablecloth for a 42 round table?
If the table is 42 inches in diameter and the height is 29 inches then 102 inch tablecloth is perfect fit which gives drop to the ground.
What size for 72 inch round table?
If the table height is standard 29 inches, if you want the drop up to the ground, you require 132 inch round tablecloth and if you want the drop half the way (i.e 15 inches) then 102 inch round tablecloth is perfect fit.
Would a 84 inch round plastic table cloth fit 60 inch round table?
84 inches round tablecloth gives a drop of 12 inches for 60 inch round table. If you want the drop up to the ground,120 inches round tablecloth is perfect fit. (above tablecloth sizes is applicable only to the std height table 29 inches)
How much edging will you need for a circular tablecloth one meter in diameter?
Length of edging required = Circumference of tablecloth = pi*diameter = pi*1 metres = pi metres. So approx 3.1416 metres.
How much fabric is needed to make a round 102 inch tablecloth?
1 of 5 Measure the diameter of your table. 2 of 5 Add the diameter of the table to twice the table's height if you want a floor-length tablecloth. 3 of 5 Add the diameter of the table to twice the desired length if you want a shorter tablecloth. (Measure the distance from the edge of the table to the desired length.) 4 of 5 Add 1 1/2 inches to your measurements to allow for a 3/4-inch hem around the bottom of the tablecloth. 5 of 5 Use this figure for both length and width of the material you will need.
How do you calculate volt drop with length and resistance?
cable length multiply with the design current and multiply again by mV/A/m (check on site guide) then devide it by 1000. then u will get the volt drops. BY; MAMERGA
