Just buy a set of custom plug wires designed to fit perfectly. Lay the new wires out and sort by length. Now remove just one old plug wire. Caution: "Remove, and replace them, one at a time, so you will not get them confused or mixed up." Place a very small amount of dielectric grease inside the boot of the plug wire and insert it over the spark plug until it snaps in place. Do the same at the distributor or coil pack if so equipped. Make sure to route the new wires exactly the same as the old ones. Take your time and use care handling the wires. Good Luck.
How do I change the spark plug wires in a 1997 dodge stratus? It seems that there are three plugs and wires that are easy to get to on the front of the engine, but the other three are somewhere behind the engine near the firewall. Thank you.
u need to quite driveing
35
Spark plug gap should be .060
you will probly need to remove the tire to get to them
Remove the spark plug wires from your 1997 Chevy Express 5.7 liter engine spark plugs. Remove the spark plugs with a 5/8 deep well socket, by turning the socket to the left. Reverse the process to install the new spark plugs.
To much resistance in the spark plug wires, replace the spark plug wires.
Changing the spark plug wires is very simple. The replacement wires are the Bosch 5812-07098319 set for the V6 orÊBosch 5812-07098498 for the 4-cylinder. One at a time, disconnect the wire from the distributor and the plug. Replace with the wire that is the same length. ProceedÊ
There is no spark plug wires on the 2.4L twin cam engine, the spark plugs are located right underneath the top cover on the head
Very carefully :)
In a 1997 Ford Ranger : The 2.3 liter four cylinder with Fords twin plug ignition system has ( 2 coil packs ) and ( 8 ) spark plug wires for the eight sparkplugs The 3.0 liter and the 4.0 liter V6 engines have ( 1 coil pack ) and ( 6 ) spark plug wires for the six spark plugs
To change the spark plugs in a 1997 astro van do I have to change the spark plugs from the bottom of the engine/