The answer to how to clean your headlight lens depends on how dirty your lens is. If it just has bug juice and road grime any good car soap will clean it, just be carefull not to scratch the plastic. However if your lens is really yellowed or the clear coat cracked then you will need kit designed to clean the lens.
Yes
To clean the inside headlight lens on a ford ranger just simply remove the cap and clean.
Cleaning Foggy HeadlightsFog is a description used to describe oxidation that sits on the surface of Plastic headlights. It comes from the UV layer deteriorating because of exposure to the elements. The only way to clean the headlight is to first remove the decomposed plastic then put on a new coat of protectant.There are several ways to do this. The easiest is to have a professional come out and clean your headlight lens. The next is to purchase a kit designed for that purpose. Some kits require the use of a drill or a buffer, some do not. Search "headlight lens cleaner" on the internet for the options available. The most expensive is to replace the headlight lens.
No, the headlamp assembly is a single unit.
Throw rice on it about 2 gallons 5 times
it's a bad headlight, the seal is broken on the lens.
If your talking about the haze on the plastic lense, you can purchase a kit from a local auto parts store that when used as directed you can polish the lense clear again.
If this is a Camry,and the headlight lens is broken,you would have to buy the whole assembly,not just a lens. If the headlight lens is discolored[being that it is plastic]there are products to make them clear. Go to E-bay motors and look up headlamp cleaners..A good product..........
Check with your local auto parts store, they have kits available that help you restore the faded/cloudy headlight lenses.
the headlamp glass is a non serviceable item, you can not disassemble the plastic exterior from the headlamp module. if your exterior lens is foggy from uv discoloration you may find after market products to clean and restore the clear lens.
If a plastic lens, drill a very small hole at the bottom to let water drain out. If a glass lens, you will have to replace.
They make kits for that. See an autoparts store.