Want this question answered?
To change the low beam lights on a 1991 Acura Integra open the hood and prop it open. Find the headlight housing and locate the smaller bulbs. Pull those off and replace them.
If only the low-beam is out, you will need to replace the low-beam bulb. It is probably not necessary to replace the entire headlight assembly.
how to replace 2007 Mercedes GL450 Headlight Bulb Low Beam
Yes, the 2003 Hyundai Accent takes a dual-beam headlight lamp for low beam and high beam. See sources and related links below for bulb information.
You Have a bad headlight, it's common when a headlight burns out for only the high beam to work, solution change your headlight.
The screw is used to adjust the headlight beam. Pull towards a wall, and you can see the beam projection to set the headlights evenly.
A sealed beam headlight is just that. The unit is sealed and you replace the entire light. A composite is made of pieces that's why the name. To replace a composite you put a new blub in the back.
The headlight bulbs just twist counter-clockwise in and out of place. They are located under the hood on either side of the radiator, directly behind the headlights. The foglights are 9006 low beam bulbs.
Carry it to dealer who will replace on low beam headlight for $15 +/- dollars in about 5 minutes.
Passenger side or driver side? BClear. The low beam is built into the same bulb as the high beam. Just pull the bulb out from behind the housing under the hood and replace it. If the low beam doesnt work you have to replace the whole bulb. They're not very expensive.
The headlight has two filaments. One for the high beam and one for the low beam. The most likely reason the high beam is out is because the high beam filament is broken. Replace the bulb and it should fix it.
replace the high beam bulb